Managing the DHCP Server
D-Link
Unified Wired and Wireless Access System
Oct. 2015
Page 132
D-Link UWS User Manual
• If you change any settings or add an excluded address range, click
Submit
to apply the changes to the
system. Each time you enter a value in the
From
or
To
fields, click
Submit
to add the address or address
range to the excluded address list.
• To Delete an address or address range from the excluded address list, select one or more check box
beneath the Delete
Excluded Addresses
field and click
Submit
.
Add Excluded Addresses
Use the
From
and
To
fields to specify the IP addresses that the server should
not assign to the client. If you want to exclude a range of addresses, set the
range boundaries.
Note:
It is strongly recommended not to add thousands of addresses in the
range. The larger the range, more time will be taken by the DHCP server to
assign an IP address.
From
To exclude an address range, specify the low address in the range.To specify a
single address to exclude, enter the address in the
From
field and leave the
To
field at the default value of 0.0.0.0. For example, in
user is adding the address 192.168.17.100 to the excluded addresses list.
To
To exclude an address range, specify the high address in the range. To exclude
a single address, do not enter a value in this field.
Delete Excluded Addresses
After you add excluded addresses, they appear below this field title, as
shows. Each address or address range has a check box
next to it.
Table 48: DHCP Server Global Configuration Fields (Cont.)
Field
Description
Summary of Contents for DWL-8600AP
Page 754: ......
