manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Managing VLANs

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 186

D-Link UWS User Manual

• If you make any changes to the page, click 

Submit

 to apply the changes to the system. To delete a VLAN, 

select the VLAN from the 

VLAN ID and Name

 field, and then click 

Delete

. You cannot delete the default 

Participation

Use this field to specify whether a port will participate in this VLAN. The 
factory default is “Autodetect.” The possible values are:

•

Include: 

This port is always a member of this VLAN. This is equivalent to 

registration fixed in the IEEE 802.1Q standard.

•

Exclude: 

This port is never a member of this VLAN. This is equivalent to 

registration forbidden in the IEEE 802.1Q standard.

•

Autodetect: 

Specifies that port may be dynamically registered in this VLAN 

via GVRP. The port will not participate in this VLAN unless it receives a 
GVRP request. This is equivalent to registration normal in the IEEE 802.1Q 
standard.

Tagging 

Select the tagging behavior for this port in this VLAN. The factory default is 
'Untagged'. The possible values are:

•

Tagged

: All frames transmitted for this VLAN will be tagged. 

•

Untagged

: All frames transmitted for this VLAN will be untagged. 

VLAN Name

Use this optional field to specify a name for the VLAN. It can be up to 32 
alphanumeric characters long, including blanks. The default is blank. VLAN ID 
1 always has a name of 'Default'.

VLAN ID-Individual/Range 

 Specify the VLAN Identifier for the new VLAN. (You can only enter data in this 
field when you are creating a new VLAN.)Specify the VLAN Identifiers for the 
VLANs being created or deleted. Single or Multiple VLANs can be specified at 
once. This field can accept single VLAN ID or range of VLAN IDs or a 
combination of both in sequence separated by ','. You can specify individual 
VLAN ID. Eg: 10 You can specify the VLAN range values separated by a '-'. E.g. 
10-13 You can specify the combination of both separated by ','. Eg: 12,15,40-
43,1000-1005,2000 The range of the VLAN ID is (2 to 4093) 

VLAN Name

Use this optional field to specify a name for the VLAN. It can be up to 32 
alphanumeric characters long, including blanks. The default is blank. VLAN ID 
1 always has a name of 'Default'. 

VLAN ID

Use this field to specify VLAN to participate. The range of the VLAN ID is (1 to 
4093) 

VLAN Participation All

Use this field to specify VLAN to participate on all the interfaces. By default, 
the field is disabled. Set the checkbox to enable the field. 

VLAN Participation

 Use this field to specify VLAN to participate. By default, the field is disabled. 
Set the checkbox to enable the field. 

Convert VLAN Type to Static

Use this field to Convert 'Dynamic' VLAN to 'Static'. A VLAN that is created by 
GVRP registration initially has a type of 'Dynamic'. By default, the field is 
disabled. Set the checkbox to enable the field. 

VLAN Type

This field identifies the type of the VLAN you are configuring. You cannot 
change the type of the default VLAN (VLAN ID = 1): it is always type 'Default'. 
When you create a VLAN, using this screen, its type will always be 'Static'. A 
VLAN that is created by GVRP registration initially has a type of 'Dynamic'.

Interface 

Indicates which port is associated with the fields on this line. 

Status 

Indicates the current value of the participation parameter for the port. 

Table 81:  VLAN Configuration Fields (Cont.)

Field

Description

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

D-Link DSN-640 Quick Installation Manual preview
DSN-640
Brand: D-Link Pages: 40
Baccara G75-DFC Installation Operation & Maintenance preview
G75-DFC
Brand: Baccara Pages: 16
Bard ECU Series Advanced Programming & Features preview
ECU Series
Brand: Bard Pages: 8
National Instruments NI cRIO-9036 User Manual preview
NI cRIO-9036
Brand: National Instruments Pages: 40
National Instruments cRIO-9063 Manual preview
cRIO-9063
Brand: National Instruments Pages: 28
National Instruments NI PXI-8104 Installation Manual preview
NI PXI-8104
Brand: National Instruments Pages: 7
Daikin BRC1H61W Installation Manual preview
BRC1H61W
Brand: Daikin Pages: 46
Daikin BRC1H61W Installation Handbook preview
BRC1H61W
Brand: Daikin Pages: 26
µ-Dimension D3208 User Manual preview
D3208
Brand: µ-Dimension Pages: 48
µ-Dimension D4006 Installation Instructions preview
D4006
Brand: µ-Dimension Pages: 2
Jetter 60873050 Manual preview
60873050
Brand: Jetter Pages: 24
WAC T24-OD-CTR Installation Instruction preview
T24-OD-CTR
Brand: WAC Pages: 5
Festo CPS-Gate Operating Instructions Manual preview
CPS-Gate
Brand: Festo Pages: 109
Topworx Valvetop DXP Installation, Operation & Maintenance Manual preview
Valvetop DXP
Brand: Topworx Pages: 8
Dungs 273061 Instructions Manual preview
273061
Brand: Dungs Pages: 56
Emec PH CONTROLLER Operating Manual preview
PH CONTROLLER
Brand: Emec Pages: 8
Brooks 5866 Installation And Operation Manual preview
5866
Brand: Brooks Pages: 66
Rheem RXMD-B04 Installation Instructions preview
RXMD-B04
Brand: Rheem Pages: 2

Brands by name

Popular brands

Load more brands