manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Configuring Advanced Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 636

D-Link UWS User Manual

Command Buttons

The page includes the following buttons:

•

Submit

—Updates the switch with the values you enter. To retain the new values across a power cycle, 

you must perform a save (Tool > Save Changes).

•

Refresh

—Updates the page with the latest information.

Known Client

The Known Client Summary shows the wireless clients currently in the Known Client Database and allows you 
to add new clients to the database. The database contains wireless client MAC addresses and names. The 
database is used to retrieve client descriptive names from the RADIUS server as well as implement MAC 
Authentication.

Figure 397:  Known Client Summary

Probe Requests Threshold 
Interval

Specify the number of seconds an AP should spend counting the probe 
messages sent by wireless clients.

Probe Requests Threshold 
Value

Specify the number of probe requests a wireless client is allowed to send 
during the threshold interval before the event is reported as a threat.

Authentication Failure 
Threshold Value

Specify the number of 802.1X authentication failures a client is allowed to 
have before the event is reported as a threat.

Table 363:  WIDS Client Configuration (Cont.)

Field

Description

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Datalogic DX8200 Quick Reference Manual preview
DX8200
Brand: Datalogic Pages: 15
KEB COMBIVERT F5 Safety Manual preview
COMBIVERT F5
Brand: KEB Pages: 16
National Instruments NI 9514 User Manual preview
NI 9514
Brand: National Instruments Pages: 72
intech 21 OPLC-2100 Operation Manual preview
OPLC-2100
Brand: intech 21 Pages: 15
R-Tec controlR Installation Manual & User Manual preview
controlR
Brand: R-Tec Pages: 14
Topcon OPUS A3 STANDARD Full Technical Data Sheet preview
OPUS A3 STANDARD Full
Brand: Topcon Pages: 10
VADDIO HOT-SHOT Installation And User Manual preview
HOT-SHOT
Brand: VADDIO Pages: 16
DekoLight 843007 Product Notes Manual preview
843007
Brand: DekoLight Pages: 48
Omega CN32Pt User Manual preview
CN32Pt
Brand: Omega Pages: 20
Magnimage LED-F706 User Manual preview
LED-F706
Brand: Magnimage Pages: 31
watt box WB-150-IPW-1B-2 Quick Start Manual preview
WB-150-IPW-1B-2
Brand: watt box Pages: 12
Samson EB 31a Mounting And Operating Instructions preview
EB 31a
Brand: Samson Pages: 68
Air Torque AT1001U Maintenance Manual preview
AT1001U
Brand: Air Torque Pages: 11
Integra 155000 Operating Instructions Manual preview
155000
Brand: Integra Pages: 17
Torqeedo 1976-00 Operating Manual preview
1976-00
Brand: Torqeedo Pages: 12
Alpha C016-1540-10 Technical Manual preview
C016-1540-10
Brand: Alpha Pages: 16
JYTEK PXI-63982 User Manual preview
PXI-63982
Brand: JYTEK Pages: 77
Smarteh LPC-2.WT1 User Manual preview
LPC-2.WT1
Brand: Smarteh Pages: 20

Brands by name

Popular brands

Load more brands