manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Basic Setup

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 558

D-Link UWS User Manual

Table 330

 describes the fields on the Wireless Network Configuration page. After you change the wireless 

network settings, click 

Submit

 to save the changes.

Table 330:  Wireless Network Configuration

 

Field

Description

SSID

Wireless clients identify a wireless network by the SSID, which is an alphanumeric 
key that uniquely identifies a wireless local area network. The SSID can be up to 
thirty-two characters in length, and there are no restrictions on the characters that 
may be used in an SSID.

Hide SSID

You can hide the SSID broadcast to discourage stations from automatically 
discovering your access point. When the broadcast SSID of the AP is hidden, the 
network name is not displayed in the list of available networks on a client station. 
Instead, the client must have the exact network name configured in the supplicant 
before it is able to connect.
Disabling the broadcast SSID is sufficient to prevent clients from accidentally 
connecting to your network, but it will not prevent even the simplest of attempts by 
a hacker to connect, or monitor unencrypted traffic.
Hiding the SSID offers a very minimal level of protection on an otherwise exposed 
network (such as a guest network) where the priority is making it easy for clients to 
get a connection and where no sensitive information is available.

Ignore Broadcast

If a wireless client broadcasts probe requests to all available SSIDs, this option 
controls whether the AP will respond to the probe request.

• Select this option to prohibit the AP from responding to client probe requests
• Clear this option to allow the AP to respond to client probe requests.

VLAN

A virtual LAN (VLAN) is a software-based, logical grouping of devices on a network 
that allow them to act as if they are connected to a single physical network, even 
though they may not be. The nodes in a VLAN share resources and bandwidth and 
are isolated on that network. 
The D-Link Unified Switch supports the configuration of a wireless VLAN. You can 
configure each VAP to be on a unique VLAN or on the same VLAN as other VAPs. 
When a wireless client connects to the AP by using this network (SSID), the AP tags 
the client’s traffic with the VLAN ID you configure in this field. By default, all networks 
use VLAN 1, which is also untagged by default. 

Note: 

The VLAN ID you configure in this field can be overridden by the VLAN ID 

configured for the AP in the RADIUS server. In other words, if your network uses a 
RADIUS server to assign wireless clients to VLANs, the wireless client uses the VLAN 
ID from the RADIUS server and ignores the VLAN ID configured on the VAP.

L3 Tunnel

The L3 Tunnel feature allows mobile stations to maintain their IP connections while 
roaming from one access point to another access point even when these access 
points are attached to different IP subnets.

Note: 

When L3 tunneling is enabled the VLAN ID is not used. In fact, the switch puts 

the management VLAN ID, if any, on the tunneled packets.

Note: 

If the wireless network topology changes (for example, a DWS-4000 Series 

switch reboots) while the L3 tunneling feature is in use, you should perform an ARP 
refresh on wired clients to speed up the process of re-establishing connectivity to the 
tunneled network.

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Gardena 4040 Operating Instructions Manual preview
4040
Brand: Gardena Pages: 100
Parker ACR7000 Series Hardware Manual preview
ACR7000 Series
Brand: Parker Pages: 21
Parker AC890PX Series Quick Start Manual preview
AC890PX Series
Brand: Parker Pages: 26
Vageo DT-1 Manual preview
DT-1
Brand: Vageo Pages: 2
Toptech MultiLoad II EXL Installation Manual preview
MultiLoad II EXL
Brand: Toptech Pages: 83
Winbond W77E516 Manual preview
W77E516
Brand: Winbond Pages: 85
McIntosh MHT200 Owner'S Manual preview
MHT200
Brand: McIntosh Pages: 68
MIT TRG-BS-12 User Manual preview
TRG-BS-12
Brand: MIT Pages: 20
Powrmatic Eurotrol 2 Installation & User'S Instructions preview
Eurotrol 2
Brand: Powrmatic Pages: 10
Altronic DE-2500 Installation & Operating Instructions Manual preview
DE-2500
Brand: Altronic Pages: 70
Aqua Lung Legend LX Second Stage Technical Maintenance Manual preview
Legend LX Second Stage
Brand: Aqua Lung Pages: 18
CASTLE THUNDERBIRD-36 User Manual preview
THUNDERBIRD-36
Brand: CASTLE Pages: 2
Danfoss AMD 610 AS Installation Manual preview
AMD 610 AS
Brand: Danfoss Pages: 2
Eaton FC6 User Manual preview
FC6
Brand: Eaton Pages: 10
Go Power GP-RVC-R Quick Start Manual preview
GP-RVC-R
Brand: Go Power Pages: 2
Napoleon eFIRE Operating Instructions Manual preview
eFIRE
Brand: Napoleon Pages: 8
Overland Storage NEO Agility 48 10GbE Card Instructions preview
NEO Agility 48 10GbE Card
Brand: Overland Storage Pages: 4
ROLA-CHEM 554200 Operating Manual preview
554200
Brand: ROLA-CHEM Pages: 16

Brands by name

Popular brands

Load more brands