manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Configuring Advanced Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 629

D-Link UWS User Manual

Command Buttons

The page includes the following buttons:

•

Submit

—Updates the switch with the values you enter. To retain the new values across a power cycle, 

you must perform a save (Tool > Save Changes).

•

Refresh

—Updates the page with the latest information.

Channel/Power

Enable this field to include the RF management information in the configuration that 
the switch pushes to its peers. 
To view the channel and power settings on the local switch, click the 

WLAN > 

Administration > AP Management  > RF Management 

tab.

AP Database

Enable this field to include the AP Database in the configuration that the switch 
pushes to its peers.
To view the contents of the local AP Database, click the 

WLAN > Administration > 

Basic Setup

 

> Valid AP

 tab.

AP Profiles

Enable this field to include all AP profiles in the configuration that the switch pushes 
to its peers. The AP profile includes the global AP settings, such as the hardware type, 
Radio settings, VAP and Wireless Network settings, and QoS settings.
To view the local AP Profile settings, click the 

WLAN > Administration > Advanced 

Configuration

 

> AP Profile 

tab.

Known Client

Enable this field to include the Known Client Database in the configuration that the 
switch pushes to its peers.
To view the contents of the local AP Database, click the 

WLAN > Administration > 

Advanced Configuration

 

> Clients > Known Client 

page.

Captive Portal

Enable this field to include the Captive Portal information in the configuration that the 
switch pushes to its peers. 
To view the Captive Portal settings on the local switch, click the pages available in the 

Security > Captive Portal 

folder.

Note: 

You can access the Captive Portal pages from either the LAN or WLAN tabs.

RADIUS Client

Enable this field to include the Client RADIUS information in the configuration that the 
switch pushes to its peers. 
To view the Client RADIUS settings on the local switch, click the pages available in the 

LAN > Security > RADIUS 

folder.

QoS ACL

Enable this field to include the QoS ACLs in the configuration that the switch pushes 
to its peers. 
To view the ACL settings on the local switch, click the pages available in the 

LAN > 

Access Control Lists 

folder.

Qos DiffServ

Enable this field to include the Diffserv classes, services, and policies in the 
configuration that the switch pushes to its peers. 
To view the DiffServ settings on the local switch, click the pages available in the 

LAN 

> QoS > Differentiated Services 

folder.

WDS Group

Enable this field to include WDS AP group information in the configuration that the 
switch pushes to its peers. 

Device Location

Enable this field to include AP and Client location information in the configuration that 
the switch pushes to its peers. 

Table 360:  Peer Switch Configuration Enable/Disable (Cont.)

Field

Description

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

Samsung SSA-P400 User Manual preview
SSA-P400
Brand: Samsung Pages: 27
Zeagle Razor Service Manual preview
Razor
Brand: Zeagle Pages: 37
GAI-Tronics Elemec3 013-02-0095-002 Manual preview
Elemec3 013-02-0095-002
Brand: GAI-Tronics Pages: 12
Eaton LS Series Instruction Leaflet preview
LS Series
Brand: Eaton Pages: 2
UniPi Technology Patron S107 Quick Start Manual preview
Patron S107
Brand: UniPi Technology Pages: 4
Newport MM4005 User Manual preview
MM4005
Brand: Newport Pages: 417
Allen-Bradley PowerFlex 755 IP00 Installation Instructions Manual preview
PowerFlex 755 IP00
Brand: Allen-Bradley Pages: 78
PSC Solar YQPV-HP360V/100A Installation And Operating Instructions Manual preview
YQPV-HP360V/100A
Brand: PSC Solar Pages: 22
Altronix Trove T1VK3F4 Installation Manual preview
Trove T1VK3F4
Brand: Altronix Pages: 8
nvent JBS-100-EC Installation Instructions Manual preview
JBS-100-EC
Brand: nvent Pages: 6
Teledyne THCD-401 Instruction Manual preview
THCD-401
Brand: Teledyne Pages: 47
Western Co WMarine10 Technical Manual preview
WMarine10
Brand: Western Co Pages: 14
NEC mPD789101 User Manual preview
mPD789101
Brand: NEC Pages: 265
National Instruments PXI-8232 Installation Manual preview
PXI-8232
Brand: National Instruments Pages: 8
TIE AMBITECH BRAKE-PAK Installation & Setup Instructions preview
AMBITECH BRAKE-PAK
Brand: TIE Pages: 5
C Prox Ltd DPS-T User Manual preview
DPS-T
Brand: C Prox Ltd Pages: 9
RADIKAL TECHNOLOGIES SAC-2K Manual preview
SAC-2K
Brand: RADIKAL TECHNOLOGIES Pages: 36
Evoqua WALLACE & TIERNAN MULTI-FUNCTIONS-CONTROLLER Short Operating Instructions preview
WALLACE & TIERNAN MULTI-FUNCTIONS-CONTROLLER
Brand: Evoqua Pages: 4

Brands by name

Popular brands

Load more brands