manualshive.com logo in svg

D-Link DWL-8600AP, User Manual

The D-Link DWL-8600AP is a high-performance wireless access point. For complete understanding and setup guidance, we provide a comprehensive User Manual that you can easily download for free from manualshive.com. This manual will assist you in getting the most out of your product and ensuring a seamless installation experience.

Share
Download
background image

Configuring IGMP Snooping

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 221

D-Link UWS User Manual

Multicast Router VLAN Status

Use the IGMP Snooping Multicast Router VLAN Status page to view multicast router settings for VLANs on a 
specific interface.

To access the IGMP Snooping Multicast Router VLAN Status page, click 

Monitoring

> IGMP Snooping Status > 

Multicast Router VLAN Status 

in the navigation tree.

Figure 126:  Multicast Router VLAN Status

The IGMP Snooping Multicast Router VLAN Status page contains the following fields: 

• Click 

Refresh

 to re-display the page with the latest information from the router.

Table 110:  Multicast Router VLAN Status Fields

Description

Slot/Port

Select the physical or LAG interface to display. 

VLAN ID

If a VLAN is enabled for multicast routing on the interface, this field displays its ID.

Multicast Router

Indicates that the multicast router is enabled for the VLAN on this interface.

Summary of Contents for DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8600AP

IBM 3746-900 Installation Manual preview
3746-900
Brand: IBM Pages: 276
IBM 3745 Series Connection And Integration Manual preview
3745 Series
Brand: IBM Pages: 157
Parker ACR7000 Series Hardware Manual preview
ACR7000 Series
Brand: Parker Pages: 21
Parker AC890PX Series Quick Start Manual preview
AC890PX Series
Brand: Parker Pages: 26
Vageo DT-1 Manual preview
DT-1
Brand: Vageo Pages: 2
Raypak RayTemp Installation & Operating Instructions Manual preview
RayTemp
Brand: Raypak Pages: 24
J+J S 20 Handbook preview
S 20
Brand: J+J Pages: 91
S&C IntelliCap Operation preview
IntelliCap
Brand: S&C Pages: 26
Apricus Sentinel S4 Mounting, Connection, Operation preview
Sentinel S4
Brand: Apricus Pages: 32
Analog Devices Linear Technology ADI Power DC3017A Demo Manual preview
Linear Technology ADI Power DC3017A
Brand: Analog Devices Pages: 12
H3C WX1804H Configuration Manual preview
WX1804H
Brand: H3C Pages: 11
Nanjing Putian Datang Information Electronics Co., Ltd. CL12/2410LI-A User Manual preview
CL12/2410LI-A
Brand: Nanjing Putian Datang Information Electronics Co., Ltd. Pages: 2
DUNIWAY Stockroom Terranova 960 Instruction Manual preview
Terranova 960
Brand: DUNIWAY Stockroom Pages: 30
Cypress Semiconductor CY8CKIT-015 Manual preview
CY8CKIT-015
Brand: Cypress Semiconductor Pages: 36
Kelly KLS4812S User Manual preview
KLS4812S
Brand: Kelly Pages: 32
QSC TSC-101-G3 User Manual preview
TSC-101-G3
Brand: QSC Pages: 13
WAGO 750-872 Quick Start Manual preview
750-872
Brand: WAGO Pages: 44
Cypress CY3250-PLC20QFN Quick Start Manual preview
CY3250-PLC20QFN
Brand: Cypress Pages: 2

Brands by name

Popular brands

Load more brands