manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

214 

 

Figure 8- 15. Tx Error Analysis (table) window 

Select the desired Switch using the 

Unit 

drop-down menu and the desired port using the 

Port

 drop-down menu. The 

Time 

Interval 

field sets the interval at which the error statistics are updated. 

The following fields can be set: 

  Parameter 

 

  Description 

Time Interval 

[1s ]

 

Select the desired setting between 1s and 60s, where "s" stands for seconds. The 
default value is one second. 

Record Number 

[200]

 

Select number of times the Switch will be polled between 20 and 200. The default 
value is 200. 

ExDefer 

Counts the number of packets for which the first transmission attempt on a particular 
interface was delayed because the medium was busy. 

CRC Error 

Counts otherwise valid packets that did not end on a byte (octet) boundary. 

LateColl 

Counts the number of times that a collision is detected later than 512 bit-times into the 
transmission of a packet. 

ExColl 

Excessive Collisions. The number of packets for which transmission failed due to 
excessive collisions. 

SingColl 

Single Collision Frames. The number of successfully transmitted packets for which 
transmission is inhibited by more than one collision. 

Coll 

An estimate of the total number of collisions on this network segment. 

Show/Hide 

Check whether or not to display ExDefer, LateColl, ExColl, SingColl, and Coll errors. 

Clear 

Clicking this button clears all statistics counters on this window. 

View Table 

Clicking this button instructs the Switch to display a table rather than a line graph. 

View Line Chart 

Clicking this button instructs the Switch to display a line graph rather than a table. 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

D-Link DAP-1650 Quick Install Manual preview
DAP-1650
Brand: D-Link Pages: 16
D-Link DCH-G020 How-To preview
DCH-G020
Brand: D-Link Pages: 2
GBC 34.0109.41 Quick Start Manual preview
34.0109.41
Brand: GBC Pages: 2
steute Ex 355 Mounting And Wiring Instructions preview
Ex 355
Brand: steute Pages: 20
Lindy 38032 User Manual preview
38032
Brand: Lindy Pages: 4
KYLAND Ruby3A Hardware Installation Manual preview
Ruby3A
Brand: KYLAND Pages: 34
TRENDnet TEG-S80Dg Brochure & Specs preview
TEG-S80Dg
Brand: TRENDnet Pages: 2
Lockly PGH222 User Manual preview
PGH222
Brand: Lockly Pages: 12
Manhattan 522908 User Manual preview
522908
Brand: Manhattan Pages: 4
SMC Networks ZSE1 Series User Manual preview
ZSE1 Series
Brand: SMC Networks Pages: 6
Digitus DS-55511 Manual preview
DS-55511
Brand: Digitus Pages: 10
IOGear CS1222TAA4 Manual preview
CS1222TAA4
Brand: IOGear Pages: 54
Omron D4JL Series Manual preview
D4JL Series
Brand: Omron Pages: 31
UniFi USW-24-POE Quick Start Manual preview
USW-24-POE
Brand: UniFi Pages: 13
Quirky R-INS-TAPT-WH02 Installation Instructions preview
R-INS-TAPT-WH02
Brand: Quirky Pages: 2
Cabletron Systems GIGAswitch GSR-16 User'S Reference Manual preview
GIGAswitch GSR-16
Brand: Cabletron Systems Pages: 346
Belkin P73957EH Quick Setup Manual preview
P73957EH
Brand: Belkin Pages: 2
Gefen EXT-HDMI-441 User Manual preview
EXT-HDMI-441
Brand: Gefen Pages: 12

Brands by name

Popular brands

Load more brands