manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

24 

Login to Web Manager 

To begin managing the Switch simply run the browser you have installed on your computer and point it to the IP address 
you have defined for the device. The URL in the address bar should read something like: http://123.123.123.123, where the 
numbers 123 represent the IP address of the Switch. 

 

NOTE:

 The Factory default IP address for the Switch is 10.90.90.90. 

In the Welcome page, click on the Login hyperlink; this opens a login dialog box. Enter a user name and password to 
access the Switch’s management main page (pictured above). There is no user name or password configured for the Switch 
in the default settings, so if this is the first time logging in it is not necessary to enter these. 

 

NOTICE:

 

Any changes made to the Switch configuration during the current 

session must be saved in the 

Save Configuration 

window (explained below) or 

use the command line interface (CLI) command 

save

.

 

Web Pages and Folders 

Below is a list and description of the main folders and windows available in the web interface: 

Configuration: 

This folder includes all the sub-folders and windows used to configure various performance functions 

of the Switch including Layer 3 functions.  

Security:

 This folder contains SSL, SSH, and Access Authentication Control sub-folders are also located here. The 

Trusted Host window link is located here as well. 

Management: 

The windows used to configure SNMP settings, management IP stations, and user accounts are located 

here.  

Monitoring: 

This folder includes stack information and data tables for performance statistics, application, and protocol 

status, including Layer 3 functions.   

Maintenance: 

Contains windows for upgrading firmware and saving configuration files (TFTP Services), saving 

configuration changes, resetting and rebooting the Switch, PING test, and logging out of the web manager. 

Single IP Management:

 SIM settings, Topology, Firmware Update, and Configuration Backup/Restore windows are 

located here. 

 

NOTE:

 

Be sure to configure the user name and password in the User Accounts 

window before connecting the Switch to the greater network.

 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

Kramer VP-727XL User Manual preview
VP-727XL
Brand: Kramer Pages: 61
Greengate VNLW-P-1001-MV-N-V Installation Instructions preview
VNLW-P-1001-MV-N-V
Brand: Greengate Pages: 2
Key Digital HD Flash 4 KD-SW4x1 Operating Instructions Manual preview
HD Flash 4 KD-SW4x1
Brand: Key Digital Pages: 12
Hama 00047693 Operating Instructions preview
00047693
Brand: Hama Pages: 2
S+S Regeltechnik HYGRASREG KW Series Operating Instructions, Mounting & Installation preview
HYGRASREG KW Series
Brand: S+S Regeltechnik Pages: 16
FCI FLT93 Series Installation, Operation, Maintenance And Troubleshooting preview
FLT93 Series
Brand: FCI Pages: 12
SMC Networks TigerAccess SMC7824M/FSW Specifications preview
TigerAccess SMC7824M/FSW
Brand: SMC Networks Pages: 2
Campbell Hausfeld CW301300AJ Additional Operating Instructions preview
CW301300AJ
Brand: Campbell Hausfeld Pages: 4
ANTAIRA LMP-0602 24-V2 Series Quick Installation Manual preview
LMP-0602 24-V2 Series
Brand: ANTAIRA Pages: 2
Key Digital KD-HDMS10X6 Setup Manual preview
KD-HDMS10X6
Brand: Key Digital Pages: 20
IMC Networks Giga-AcessEtherLinx-II Operation Manual preview
Giga-AcessEtherLinx-II
Brand: IMC Networks Pages: 40
SICK 8026014 Operating Instructions Manual preview
8026014
Brand: SICK Pages: 64
Ubiquiti EdgeSwitch 16XP Quick Start Manual preview
EdgeSwitch 16XP
Brand: Ubiquiti Pages: 20
SDMO VERSO 50 Instruction Manual preview
VERSO 50
Brand: SDMO Pages: 24
VXI Tuffset 200302F User Manual preview
Tuffset 200302F
Brand: VXI Pages: 2
Eaton Pow-R-Line CS Instruction Manual preview
Pow-R-Line CS
Brand: Eaton Pages: 20
Exsys EX-1113HMS Manual preview
EX-1113HMS
Brand: Exsys Pages: 14
autenco AUT PIRSP Installation & Operating Instructions preview
AUT PIRSP
Brand: autenco Pages: 2

Brands by name

Popular brands

Load more brands