manualshive.com logo in svg

D-Link DGS-3312SR, Manual

Share
Download
D-Link DGS-3312SR Manual Download Page 182

DGS-3312SR Stackable Gigabit Layer 3 Switch 

169 

 

 

 

 

 

 

 

NOTE:

 Enabling the SSL command will disable the web-based 

switch management. To log on to the Switch again, the header of 
the URL must begin with https://. Entering anything else into the 
address field of the web browser will result in an error and no 
authentication will be granted. 

 

NOTE:

 Certain implementations concerning the function and 

configuration of SSL are not available on the web-based 
management of this Switch and need to be configured using the 
command line interface. For more information on SSL and its 
functions, see the 

DGS-3312SR Command Line Reference

 

Manual

, located on the documentation CD of this product. 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands