manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

26 

 

Figure 3-3.  Switch IP Settings window  

 

NOTE:

 The Switch’s factory default IP address is 10.90.90.90 with a subnet mask 

of 255.0.0.0 and a default gateway of 0.0.0.0.

 

 

To manually assign the Switch’s IP address, subnet mask, and default gateway address: 

• 

Select 

Manual 

from the Get IP From

 

drop-down menu. 

• 

Enter the appropriate IP address and subnet mask. 

If you want to access the Switch from a different subnet from the one it is installed on, enter the IP address of the gateway. 
If you will manage the Switch from the subnet on which it is installed, you can leave the default address (0.0.0.0) in this 
field. 

If no VLANs have been previously configured on the Switch, you can use the default VLAN ID (VID) 1. The default 
VLAN contains all of the Switch ports as members. If VLANs have been previously configured on the Switch, you will 
need to enter the VLAN ID of the VLAN that contains the port connected to the management station that will access the 
Switch. The Switch will allow management access from stations with the same VID listed here.  

To use the BOOTP or DHCP protocols to assign the Switch an IP address, subnet mask, and default gateway address: 

Use the Get IP From

 

pull-down menu to choose from 

BOOTP

 or 

DHCP

. This selects how the Switch will be assigned an 

IP address on the next reboot. 

The 

Switch IP Settings 

options are: 

 Parameter 

 

     Description 

BOOTP 

The Switch will send out a BOOTP broadcast request when it is powered up. The 
BOOTP protocol allows IP addresses, network masks, and default gateways to be 
assigned by a central BOOTP server. If this option is set, the Switch will first look for a 
BOOTP server to provide it with this information before using the default or previously 
entered settings. 

DHCP 

The Switch will send out a DHCP broadcast request when it is powered up. The DHCP 
protocol allows IP addresses, network masks, and default gateways to be assigned by a 
DHCP server. If this option is set, the Switch will first look for a DHCP server to provide 
it with this information before using the default or previously entered settings. 

Manual 

Allows the entry of an IP address, Subnet Mask, and a Default Gateway for the Switch. 
These fields should be of the form xxx.xxx.xxx.xxx, where each xxx is a number 
(represented in decimal form) between 

0

 and 

255

. This address should be a unique 

address on the network assigned for use by the network administrator. The fields which 
require entries under this option are as follows: 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

CALIENT S320 Repair And Diagnostics Field Manual preview
S320
Brand: CALIENT Pages: 22
Campbell SDS-122 Instruction Manual preview
SDS-122
Brand: Campbell Pages: 14
Datavideo DAC-10 Quick Setup preview
DAC-10
Brand: Datavideo Pages: 2
SAL PIXIE Smart Switch G3 Quick Start Manual preview
PIXIE Smart Switch G3
Brand: SAL Pages: 2
Eaton Cooper Power Systems LCR 6200 RFN Instructional Leaflet preview
Cooper Power Systems LCR 6200 RFN
Brand: Eaton Pages: 8
Free-Way Switch 3X3-08 Instructions Manual preview
3X3-08
Brand: Free-Way Switch Pages: 6
Net Generation NG-PGS164W User Manual preview
NG-PGS164W
Brand: Net Generation Pages: 38
Unipoe PM5003GSN User Manual preview
PM5003GSN
Brand: Unipoe Pages: 9
Cabletron Systems ELS10-26TX User Manual preview
ELS10-26TX
Brand: Cabletron Systems Pages: 116
DANLERS CESFPIRSV Installation Notes preview
CESFPIRSV
Brand: DANLERS Pages: 2
Intellinet 560641 Instructions Manual preview
560641
Brand: Intellinet Pages: 12
3onedata IES6300PRO Series Quick Installation Manual preview
IES6300PRO Series
Brand: 3onedata Pages: 5
Lantech TES-R6616XFT User Manual preview
TES-R6616XFT
Brand: Lantech Pages: 27
WIKA OLS-5200 Operating Instructions Manual preview
OLS-5200
Brand: WIKA Pages: 52
Equip Desktop KVM Switch Manual preview
Desktop KVM Switch
Brand: Equip Pages: 10
C4i HDP-MXB88DA User Manual preview
HDP-MXB88DA
Brand: C4i Pages: 22
StarTech.com ST3504USB Specifications preview
ST3504USB
Brand: StarTech.com Pages: 2
Lindy 38273 User Manual preview
38273
Brand: Lindy Pages: 12

Brands by name

Popular brands

Load more brands