manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

30 

Save Changes 

Changes made to the Switch’s configuration must be saved in order to retain them. Access the 

Save Configuration

 

window by clicking the 

Save Changes 

button located in the 

Maintenance

 folder. 

 

Figure 3- 8. Save Configuration window 

The Switch has two levels of memory, normal RAM and non-volatile or NV-RAM. To save all the changes made in the 
current session to the Switch’s flash memory, click the 

Save Configuration

 button. Click the 

OK 

button in the new dialog 

box that appears to continue. When this is done, the settings will be immediately applied to the Switching software in 
RAM, and will immediately take effect. Once the Switch configuration settings have been saved to NV-RAM, they 
become the default settings for the Switch. These settings will be used every time the Switch is rebooted. 

Some settings, though, require you to restart the Switch before they will take effect. Restarting the Switch erases all 
settings in RAM and reloads the stored settings from the NV-RAM. Thus, it is necessary to save all setting changes to NV-
RAM before rebooting the Switch. 

Factory Reset 

Click the 

Factory Reset 

link in the 

Maintenance 

folder to bring up the following window. 

 

Figure 3- 9. Factory Reset to Default Value window 

The following options are available to perform a factory reset: 

• 

Reset

 

−

 Returns all configuration settings to the factory default settings except the Switch’s stacking 

mode, user account, IP address, subnet mask, and default gateway settings. 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

D-Link DSS-16+ Reference Manual preview
DSS-16+
Brand: D-Link Pages: 2
Cabletron Systems SmartCell 6A000 User Manual preview
SmartCell 6A000
Brand: Cabletron Systems Pages: 114
Cabletron Systems MRX Installation Manual preview
MRX
Brand: Cabletron Systems Pages: 62
Cabletron Systems CyberSWITCH CSX150 Quick Start Manual preview
CyberSWITCH CSX150
Brand: Cabletron Systems Pages: 49
Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual preview
Cabletron CyberSWITCH CSX5500
Brand: Cabletron Systems Pages: 729
CYP PU-8H8HBTPL-4K22 Operation Manual preview
PU-8H8HBTPL-4K22
Brand: CYP Pages: 24
H3C S3100-SI Series Quick Start Manual preview
S3100-SI Series
Brand: H3C Pages: 58
Accton Technology ES4710BD User Manual preview
ES4710BD
Brand: Accton Technology Pages: 547
Rockwell Automation Allen-Bradley 800F-ALR1 Installation Instructions preview
Allen-Bradley 800F-ALR1
Brand: Rockwell Automation Pages: 2
TRENDnet TK-407K - KVM Switch - USB Specifications preview
TK-407K - KVM Switch - USB
Brand: TRENDnet Pages: 2
Versitron SG70660M Installation Manual preview
SG70660M
Brand: Versitron Pages: 46
ATEN VM7814 Quick Start Manual preview
VM7814
Brand: ATEN Pages: 2
ClimaxDigital CHM0402V3 User Manual preview
CHM0402V3
Brand: ClimaxDigital Pages: 9
Avenview SW-HDM3D-C5-8X8 User Manual preview
SW-HDM3D-C5-8X8
Brand: Avenview Pages: 20
Novus NVS-3208SP-EH User Manual preview
NVS-3208SP-EH
Brand: Novus Pages: 16
JDS Uniphase SKB Series User Manual preview
SKB Series
Brand: JDS Uniphase Pages: 113
AAVARA PM4X2 Installation Manual preview
PM4X2
Brand: AAVARA Pages: 8
B&B Electronics Elinx EIRP305-T Quick Start Manual preview
Elinx EIRP305-T
Brand: B&B Electronics Pages: 2

Brands by name

Popular brands

Load more brands