DGS-3312SR Stackable Gigabit Layer 3 Switch
100
SNTP Settings
The Simple Network Time Protocol (SNTP) (an adaptation of the Network Time Protocol (NTP)) is configured on the
Switch using the following windows.
Time Setting
The following window will allow the user to configure the time settings for the Switch and can be accessed by clicking
Configuration > SNTP Settings > Time Setting
. Click
Apply
to implement changes made.
Figure 4- 70. Current Time: Status window
The following parameters can be set or are displayed:
Parameter
Description
Current Time
Displays the current system time.
Time Source
Displays the time source for the system.
SNTP State
Use this pull-down menu to enable or disable SNTP.
SNTP Primary Server
This is the primary server from which SNTP information will be taken.
SNTP Secondary
Server
This is the secondary server from which the SNTP information will be taken, if the
primary server fails.
SNTP Poll Interval in
Seconds
This is the interval between requests for updated SNTP information.
Year
Enter the current year, to update the system clock.
Month
Enter the current month, to update the system clock.
Day
Enter the current day, to update the system clock.
Time in HH MM SS
Enter the current time in hours, minutes, and seconds, to update the system clock.
