manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

173 

AES128-CBC 

Use the pull-down menu to enable or disable the Advanced Encryption Standard 
AES128 encryption algorithm with Cipher Block Chaining. The default is 

Enabled.

 

AES192-CBC 

Use the pull-down menu to enable or disable the Advanced Encryption Standard 
AES192 encryption algorithm with Cipher Block Chaining. The default is 

Enabled.

 

AES256-CBC 

Use the pull-down menu to enable or disable the Advanced Encryption Standard 
AES256 encryption algorithm with Cipher Block Chaining. The default is 

Enabled.

 

ARC4 

Use the pull-down menu to enable or disable the Arcfour encryption algorithm. The 
default is 

Enabled.

 

Cast128-CBC 

Use the pull-down menu to enable or disable the Cast128 encryption algorithm with 
Cipher Block Chaining. The default is 

Enabled.

 

Twofish128 

Use the pull-down menu to enable or disable the twofish128 encryption algorithm. The 
default is 

Enabled.

 

Twofish192 

Use the pull-down menu to enable or disable the twofish192 encryption algorithm. The 
default is 

Enabled.

 

Twofish256 

Use the pull-down menu to enable or disable the twofish256 encryption algorithm. The 
default is 

Enabled.

 

Data Integrity Algorithm 

HMAC-SHA1 

Use the pull-down menu to enable or disable the HMAC (Hash for Message 
Authentication Code) mechanism utilizing the Secure Hash Algorithm encryption. The 
default is 

Enabled.

 

HMAC-MD5 

Use the pull-down menu to enable or disable the HMAC (Hash for Message 
Authentication Code) mechanism utilizing the MD5 Message Digest encryption 
algorithm. The default is 

Enabled.

 

Public Key Algorithm 

HMAC-RSA 

Use the pull-down menu to enable or disable the HMAC (Hash for Message 
Authentication Code) mechanism utilizing the RSA encryption algorithm. The default is 

Enabled.

 

HMAC-DSA 

Use the pull-down menu to enable or disable the HMAC (Hash for Message 
Authentication Code) mechanism utilizing the Digital Signature Algorithm encryption. 
The default is 

Enabled.

 

Authentication Algorithm 

Password 

This parameter may be enabled if the administrator wishes to use a locally configured 
password for authentication on the Switch. The default is 

Enabled.

  

Public Key 

This parameter may be enabled if the administrator wishes to use a publickey 
configuration set on a SSH server, for authentication. The default is 

Enabled.

 

Host-based 

This parameter may be enabled if the administrator wishes to use a host computer for 
authentication. This parameter is intended for Linux users requiring SSH 
authentication techniques and the host computer is running the Linux operating 
system with a SSH program previously installed. The default is 

Enabled.

 

Click 

Apply

 to implement changes made. 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

Cisco Catalyst 3110G Getting Started Manual preview
Catalyst 3110G
Brand: Cisco Pages: 30
Cabletron Systems SEHI100TX-22 User Manual preview
SEHI100TX-22
Brand: Cabletron Systems Pages: 88
Hama USB Hub Operating Instruction preview
USB Hub
Brand: Hama Pages: 14
Hama Super Speed USB 3.0 Hub Operating Instruction preview
Super Speed USB 3.0 Hub
Brand: Hama Pages: 14
Hama S1110 Operating Instruction preview
S1110
Brand: Hama Pages: 12
Hama 78496 Operating Instruction preview
78496
Brand: Hama Pages: 14
Hama Premium Silver USB 2.0 Hub 1:4 Operating Instruction preview
Premium Silver USB 2.0 Hub 1:4
Brand: Hama Pages: 12
Hama S2110 Operating Instruction preview
S2110
Brand: Hama Pages: 18
Hama uRage Vendetta 210 Manual preview
uRage Vendetta 210
Brand: Hama Pages: 36
H3C S5800-EI Series Installation Manual preview
S5800-EI Series
Brand: H3C Pages: 61
FLIR ACCDPS281B Quick Start Manual preview
ACCDPS281B
Brand: FLIR Pages: 2
Matrix Switch Corporation MSC-DE1664 Product Manual preview
MSC-DE1664
Brand: Matrix Switch Corporation Pages: 60
G&D TradeSwitch2-USB Assembly, Installation And Operation Manual preview
TradeSwitch2-USB
Brand: G&D Pages: 88
Watchguard XTM 3 Series Hardware Manual preview
XTM 3 Series
Brand: Watchguard Pages: 26
Crestron CLW-SW1/4RF Operation Manual preview
CLW-SW1/4RF
Brand: Crestron Pages: 36
M-system SHSP Instruction Manual preview
SHSP
Brand: M-system Pages: 4
Vagner Pool PRO PIEZO 1 Instruction Manual preview
PRO PIEZO 1
Brand: Vagner Pool Pages: 5
Leaksafe Solutions WaterSwitch2 Installation Instructions Manual preview
WaterSwitch2
Brand: Leaksafe Solutions Pages: 12

Brands by name

Popular brands

Load more brands