manualshive.com logo in svg

D-Link DGS-3312SR, Manual

Share
Download
D-Link DGS-3312SR Manual Download Page 189

DGS-3312SR Stackable Gigabit Layer 3 Switch 

176 

Policy & Parameters 

This command will enable an administrator-defined authentication policy for users trying to access the Switch. When 
enabled, the device will check the 

Login Method List

 and choose a technique for user authentication upon login.   

To access the following window, click

 Security > Access Authentication Control > Policy & Parameters

: 

 

Figure 6- 8. Policy & Parameters Settings window 

The following parameters can be set: 

Parameters 

  Description 

 

Authentication Policy 

Use the pull-down menu to enable or disable the Authentication Policy on the 
Switch. 

Response timeout (1-255) 

This field will set the time the Switch will wait for a response of authentication 
from the user. The user may set a time between 

1

 and 

255

 seconds. The 

default setting is 

30

 seconds. 

User attempts (1-255) 

This command will configure the maximum number of times the Switch will 
accept authentication attempts. Users failing to be authenticated after the set 
amount of attempts will be denied access to the Switch and will be locked out 
of further authentication attempts. Command line interface users will have to 
wait 

60 

seconds before another authentication attempt. Telnet and web users 

will be disconnected from the Switch. The user may set the number of 
attempts from 

1

 to 

255

. The default setting is 

3

. 

Click 

Apply

 to implement changes made. 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands