manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

245 

Right-click 

Right clicking on a device will allow the user to perform various functions, depending on the role of the Switch in the SIM 
group and the icon associated with it. 

Group Icon 

     

 

Figure 10- 8. Right-clicking a Group Icon 

The following options may appear for the user to configure: 

• 

Collapse

 - to collapse the group that will be represented by a single icon. 

• 

Expand

 - to expand the SIM group, in detail.  

• 

Property

 - to pop up a window to display the group information. 

 

Figure 10- 9. Property dialog box 

This window holds the following information: 

Parameter                 Description  

Device Name 

This field will display the Device Name of the Switches in the SIM group configured by the 
user. If no Device Name is configured by the name, it will be given the name default and 
tagged with the last six digits of the MAC Address to identify it. 

Module Name 

Displays the full module name of the Switch that was right-clicked. 

MAC Address 

Displays the MAC Address of the corresponding Switch. 

Remote Port No. 

Displays the number of the physical port on the MS or CaS that the CS is connected to. 
The CS will have no entry in this field. 

Local Port No. 

Displays the number of the physical port on the CS that the MS or CaS is connected to. 
The CS will have no entry in this field. 

Port Speed 

Displays the connection speed between the CS and the MS or CaS 

 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

XtendLan MATRIX1608A User Manual preview
MATRIX1608A
Brand: XtendLan Pages: 24
Magnum M9-EKCS Quick Start Manual preview
M9-EKCS
Brand: Magnum Pages: 3
Cabletron Systems Cyber SWITCH 1000 User Manual preview
Cyber SWITCH 1000
Brand: Cabletron Systems Pages: 106
Vega VEGAWAVE S 61 Operating Instructions Manual preview
VEGAWAVE S 61
Brand: Vega Pages: 44
SUCO 0140 Series Operating Instructions preview
0140 Series
Brand: SUCO Pages: 2
Bridgetek PANL PH44 Quick Start Manual preview
PANL PH44
Brand: Bridgetek Pages: 2
Black Box ServSwitch 17S Quick Start Manual preview
ServSwitch 17S
Brand: Black Box Pages: 10
ORiNG TGS-1080-M12 Series Quick Installation Manual preview
TGS-1080-M12 Series
Brand: ORiNG Pages: 2
JetNet 5018G Series Quick Installation Manual preview
5018G Series
Brand: JetNet Pages: 20
Cumberland PowerTrak Installation preview
PowerTrak
Brand: Cumberland Pages: 2
IDT 89HPES12N3 User Manual preview
89HPES12N3
Brand: IDT Pages: 158
Little Giant RS-5 Instruction Sheet preview
RS-5
Brand: Little Giant Pages: 8
3onedata TNS5000D Series Quick Installation Manual preview
TNS5000D Series
Brand: 3onedata Pages: 3
LINK-MI LM-AD01 User Manual preview
LM-AD01
Brand: LINK-MI Pages: 9
ClimaxDigital CHM0402V3 User Manual preview
CHM0402V3
Brand: ClimaxDigital Pages: 9
Gigacore GNS-801G User Manual preview
GNS-801G
Brand: Gigacore Pages: 8
Rosewill RGS-1016 User Manual preview
RGS-1016
Brand: Rosewill Pages: 9
StarTech.com VS122HDMIU Instruction Manual preview
VS122HDMIU
Brand: StarTech.com Pages: 2

Brands by name

Popular brands

Load more brands