DGS-3312SR Stackable Gigabit Layer 3 Switch
120
Static ARP Settings
The
Address Resolution Protocol
(
ARP
) is a TCP/IP protocol that converts IP addresses into physical addresses. This table
allows network managers to view, define, modify and delete ARP information for specific devices. Use the
Static ARP
Settings
window to create permanent entries in the ARP table for different IP interfaces. Static ARP entries that have been
configured appear in the Static ARP Settings table in this window. To add a new static ARP entry, click on the
Add
button,
a new window appears (see below). To remove an existing entry, click the
X
button in the Delete column for the entry you
want to eliminate. To delete all static ARP entries, click the
Clear All
button.
To open the
Static ARP Table
open the
Configuration
folder, and then open the
Layer 3 IP Networking
folder and click
on the
Static ARP Settings
link.
Figure 5- 10. Static ARP Settings window
Clicking the
Add
button allows you to add a new entry using the window below.
Figure 5- 11. Static ARP Table – Add a New Entry window
Clicking the
Modify
button allows you to add a new entry using the window below.
Figure 5- 12. Static ARP Table – Modify window
Enter the IP address and the MAC address of the device you want to map with ARP and click the
Apply
button. The new
entry will appear in the
Static ARP Settings
window. Click the
Show All Static ARP Entries
link to see the
Static ARP
Settings
window.
