DGS-3312SR Stackable Gigabit Layer 3 Switch
178
Authentication Server Group
This window will allow users to set up
Authentication Server Groups
on the Switch. A server group is a technique used
to group RADIUS, TACACS, , and XTACACS server hosts into user-defined categories for authentication
using method lists. The user may define the type of server group by protocol or by previously defined server group. The
Switch has four built-in Authentication Server Groups that cannot be removed but can be modified. Up to eight
authentication server hosts may be added to any particular group.
To view the following window, click
Security > Access Authentication Control > Authentication Server Group
:
Figure 6- 10. Authentication Server Group Settings window
This window displays the
Authentication Server Groups
on the Switch. The Switch has four built-in
Authentication
Server Groups
that cannot be removed but can be modified. To modify a particular group, click its hyperlinked
Group
Name
, which will then display the following window.
Figure 6- 11. Add a Server Host to Server Group (radius) window
To add an
Authentication Server Host
to the list, enter its IP address in the IP Address field, choose the protocol
associated with the IP address of the Authentication Server Host (
RADIUS
,
TACACS
,
, or
XTACACS
) and click
Add
to add this Authentication Server Host to the group.
To add a server group other than the ones listed, click the add button, revealing the following window to configure.
Figure 7- 1. Authentication Server Group Table Add Settings window
Enter a group name of up to 16 characters into the
Group Name
field and click
Apply
. The entry should appear in the
Authentication Server Group Settings
window, as shown in Figure 6-10 (Darren).
