D-Link DGS-3312SR Manual Download

Page: 86 / 283

DGS-3312SR Stackable Gigabit Layer 3 Switch

Click

Apply

to implement changes made.

To configure the parameters for a previously set MSTI, click on its hyperlinked

MSTI ID

number, which will reveal the

following screen for configuration.

Figure 4- 38. Instance ID Settings window - Modify

The user may configure the following parameters for a MSTI on the Switch.

Parameter Description

MSTI ID

Displays the MSTI ID previously set by the user.

Type

This field allows the user to choose a desired method for altering the MSTI settings.
The user has 2 choices.

•

Add VID

- Select this parameter to add VIDs to the MSTI ID, in conjunction

with the VID List parameter.

•

Remove VID

- Select this parameter to remove VIDs from the MSTI ID, in

conjunction with the VID List parameter.

VID List (1-4094)

This field is used to specify the VID range from configured VLANs set on the Switch
that the user wishes to add to this MSTI ID. Supported VIDs on the Switch range from
ID number 1 to 4094. This parameter can only be utilized if the

Type

chosen is

Add

Remove

Click

Apply

to implement changes made.

Summary of Contents for DGS-3312SR




























































































































































































































































































Search results

Summary of Contents for DGS-3312SR

Reviews:

Related manuals for DGS-3312SR

Brands by name

Popular brands

D-Link DGS-3312SR, Manual

Search results

Summary of Contents for DGS-3312SR

Reviews:

Related manuals for DGS-3312SR

Brands by name

Popular brands