manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

5 

Rear Panel Description 

The rear panel of the Switch contains an AC power connector. 

 

Figure 1- 4.  Rear panel view of the Switch  

The AC power connector is a standard three-pronged connector that supports the power cord. Plug-in the female connector 
of the provided power cord into this socket, and the male side of the cord into a power outlet. The Switch automatically 
adjusts its power setting to any supply voltage in the range from 100 ~ 240 VAC at 50 ~ 60 Hz. 

RPS Connector 

Connect the optional external redundant power supply to the RPS connector. If the Switch’s internal power unit fails, the 
redundant power system automatically supplies power to the Switch for uninterrupted operation. 
The Switch supports the D-Link RPS-200 or RPS-500 redundant power supply units.

 

Plug-in Modules 

The DGS-3312SR Switch is able to accommodate optional plug-in modules in order to increase functionality and 
performance. Two modules may be installed and used in combination with any of the three available modules. Plug-in 
modules must be purchased separately.  

DEM-340T 1000BASE-T Module 

 

Figure 1- 5. 1000BASE-T Four-port module 

• 

Front-panel module 

• 

Connects to 1000BASE-T devices 

• 

May be used as stacking ports for DES-3250TG slave switches. 

• 

LED indicators for Link/Activity

 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

Cisco Catalyst 3110G Getting Started Manual preview
Catalyst 3110G
Brand: Cisco Pages: 30
IDEC HS5L Series Instruction Sheet preview
HS5L Series
Brand: IDEC Pages: 8
IDEM SAFETY SWITCHES MPR Operating Instructions preview
MPR
Brand: IDEM SAFETY SWITCHES Pages: 2
JB Systems Light SW-416 Operation Manual preview
SW-416
Brand: JB Systems Light Pages: 15
UNICOM FEP-31024T-3 Specifications preview
FEP-31024T-3
Brand: UNICOM Pages: 1
UNICOM DynaGST/2402G GEP-33224T-1 Specifications preview
DynaGST/2402G GEP-33224T-1
Brand: UNICOM Pages: 1
UNICONTROL Electronic Cleveland Controls RSS-498-013 Manual preview
Cleveland Controls RSS-498-013
Brand: UNICONTROL Electronic Pages: 2
Aruba 2930F Series Installation, Safety, And Regulatory Information preview
2930F Series
Brand: Aruba Pages: 6
Intermatic T7802BC Supplementary Manual preview
T7802BC
Brand: Intermatic Pages: 1
Labgear 28574LAB User Manual preview
28574LAB
Brand: Labgear Pages: 4
ATEN ALTUSCN KH1508I User Manual preview
ALTUSCN KH1508I
Brand: ATEN Pages: 173
Leonton ET2-0602-M Series User Manual preview
ET2-0602-M Series
Brand: Leonton Pages: 17
PNI CT25WIFI User Manual preview
CT25WIFI
Brand: PNI Pages: 92
Fairchild FSDH321 Manual preview
FSDH321
Brand: Fairchild Pages: 20
SMC Networks SMC8606SX Specification Sheet preview
SMC8606SX
Brand: SMC Networks Pages: 2
H3C S6890-54HF Installation, Quick Start preview
S6890-54HF
Brand: H3C Pages: 3
Accton Technology CheetaHub Classic-2041 Quick Installation Manual preview
CheetaHub Classic-2041
Brand: Accton Technology Pages: 7
Eneo 230033 Quick Installation Manual preview
230033
Brand: Eneo Pages: 19

Brands by name

Popular brands

Load more brands