D-Link DGS-3312SR Manual Download Page 15

Page: 15 / 283

DGS-3312SR Stackable Gigabit Layer 3 Switch

•

Per-port bandwidth control

•

Broadcast, Multicast and DLF storm control

•

IEEE 802.3z and IEEE 802.3x compliant Flow Control for all Gigabit ports

•

SNMP v.1, v.2, v.3 network management, RMON support

•

Supports optional external Redundant Power Supply

•

Supports Web-based management.

•

Supports CLI management.

•

Supports BOOTP/DHCP/DNS Relay

•

Supports TFTP upgrade

•

Supports System Log

•

Fully configurable either in-band or out-of-band control via RS-232 console serial connection.

•

Telnet remote control console

•

Traffic Segmentation

•

Simple Network Time Protocol

•

MAC address update notification

•

Web GUI Traffic Monitoring

•

Supports RIP v1, v2

•

Supports OSPF

•

Supports PIM-DM

•

Supports DVMRP

•

Supports IGMP

•

Supports VRRP

•

Supports floating static route

•

Supports SSL

•

Supports SSH

•

Supports Single IP Management v.1.0

•

Supports RADIUS Authentication

•

Supports TACACS, , and XTACACS

Summary of Contents for DGS-3312SR




























































































































































































































































































Search results

Summary of Contents for DGS-3312SR

Reviews:

Brands by name

Popular brands

D-Link DGS-3312SR, Manual

Search results

Summary of Contents for DGS-3312SR

Reviews:

Brands by name

Popular brands