D-Link DGS-3312SR Page 192 Manual Download

Page: 192 / 283

DGS-3312SR Stackable Gigabit Layer 3 Switch

179

NOTE:

The user must configure Authentication Server Hosts using the

Authentication Server Host Settings

window before adding hosts to the

list. Authentication Server Hosts

must be configured for their specific

protocol on a remote centralized server before this function can work
properly.

NOTE:

The four built in server groups can only have server hosts running

the same TACACS / RADIUS daemon. RADIUS, TACACS, ,
and XTACACS protocols are separate entities and are not compatible
with each other.

Summary of Contents for DGS-3312SR




























































































































































































































































































Search results

Summary of Contents for DGS-3312SR

Reviews:

Related manuals for DGS-3312SR

Brands by name

Popular brands

D-Link DGS-3312SR, Manual

Search results

Summary of Contents for DGS-3312SR

Reviews:

Related manuals for DGS-3312SR

Brands by name

Popular brands