manualshive.com logo in svg

D-Link DGS-3312SR, Manual

Share
Download
D-Link DGS-3312SR Manual Download Page 99

DGS-3312SR Stackable Gigabit Layer 3 Switch 

86 

 Parameter 

 

  Description 

Unit 

Choose the Switch on which the VLAN will be created. 

VID 

(VLAN ID)

 

For a new VLAN entry, type in a unique identifier. This number is used to configure 
other settings such as GVRP status for ports in the VLAN. 

Auto Assign

 – Checking this box will automatically assign a VID to the new VLAN 

entry. 

VLAN Name 

For a new VLAN entry type in a unique name. This name can be used to identify the 
VLAN for IP interface assignment. Remember that VLAN names are case-sensitive 
when referring to them for other applications (such as setting up IP interfaces). 

Advertisement 

Enabling this function will allow the Switch to send out GVRP packets to outside 
sources, notifying that they may join the existing VLAN. 

Port 

Configure each individual port to be specified as member or nonmember of the VLAN. 

Tag 

Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will 
designate the port as Tagged. 

None 

Specifies the port as not being a static member of the VLAN, but with no restrictions 
for joining the VLAN dynamically through GVRP. 

Egress 

Select this to specify the port as a static member of the VLAN. Egress member ports 
are ports that will be transmitting traffic for the VLAN. These ports can be either 
tagged or untagged. 

Forbidden 

Select this to specify the port as not being a member of the VLAN and that the port is 
forbidden from becoming a member of the VLAN dynamically. 

The illustration below displays the port settings for a new VLAN (engineering) with a VID of 11. 

 

Figure 4- 53. Add New Static VLAN Example window 

Click the 

Show All Static VLAN Entries

 link to return to the first 

802.1Q Static VLANs

 window, the new VLAN entry 

appears listed in the current entries table. 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands