manualshive.com logo in svg

D-Link DGS-3312SR, Manual

The D-Link DGS-3312SR is a powerful network switch designed for high-performance environments. With advanced features and exceptional reliability, this switch maximizes data transfer speeds and ensures optimal network performance. Enhance your networking experience with our detailed "Product Manual", available for "free" download at manualshive.com.

Share
Download
background image

DGS-3312SR Stackable Gigabit Layer 3 Switch 

208 

 

Figure 8- 9. Rx Packets Analysis (table for Unicast, Multicast, & Broadcast) window 

Select the desired Switch using the 

Unit

 drop-down menu and the desired port using the 

Port

 drop-down menu.  The 

Time 

Interval

 field sets the interval at which the error statistics are updated. 

The following fields can be set: 

Parameter  

Description 

Time Interval [1s] 

Select the desired setting between 1s and 60s, where "s" stands for seconds. The 
default value is one second. 

Record Number [200] 

Select number of times the Switch will be polled between 20 and 200. The default 
value is 200. 

Unicast 

Counts the total number of good packets that were received by a unicast address. 

Multicast 

Counts the total number of good packets that were received by a multicast address. 

Broadcast 

Counts the total number of good packets that were received by a broadcast address. 

Show/Hide 

Check whether or not to display Multicast, Broadcast, and Unicast Packets. 

Clear 

Clicking this button clears all statistics counters on this window. 

View Table 

Clicking this button instructs the Switch to display a table rather than a line graph. 

View Line Chart 

Clicking this button instructs the Switch to display a line graph rather than a table. 

 

Summary of Contents for DGS-3312SR




























































































































































































































































































Reviews:

No comments

Related manuals for DGS-3312SR

G&D DVIMUX4-DL-USB Installation And Operations preview
DVIMUX4-DL-USB
Brand: G&D Pages: 36
Eaton LPC25-16FUSE Instruction Leaflet preview
LPC25-16FUSE
Brand: Eaton Pages: 2
Extreme Networks ExtremeSwitching SLX 9540 Hardware Installation Manual preview
ExtremeSwitching SLX 9540
Brand: Extreme Networks Pages: 108
TP-Link Tapo S210 User Manual preview
Tapo S210
Brand: TP-Link Pages: 28
Belkin 24-Port Gigabit Switch Specifications preview
24-Port Gigabit Switch
Brand: Belkin Pages: 2
Inter-m PX-6116 Operation Manual preview
PX-6116
Brand: Inter-m Pages: 12
Vertiv XTE PTS Series Description And Installation Manual preview
XTE PTS Series
Brand: Vertiv Pages: 24
Quirky R-INS-TAPT-WH02 Installation Instructions preview
R-INS-TAPT-WH02
Brand: Quirky Pages: 2
G&D DP1.2-MUX2-NT Installation And Operation Manual preview
DP1.2-MUX2-NT
Brand: G&D Pages: 76
Tripp Lite B004-DUA2-HR-K Owner'S Manual preview
B004-DUA2-HR-K
Brand: Tripp Lite Pages: 20
Dell PowerConnect 2808 Getting Started Manual preview
PowerConnect 2808
Brand: Dell Pages: 260
Dell PowerConnect 5316M Reference Manual preview
PowerConnect 5316M
Brand: Dell Pages: 378
Dell PowerConnect 3424 Release Notes preview
PowerConnect 3424
Brand: Dell Pages: 9
Kenwood KVA-S300 Instruction Manual preview
KVA-S300
Brand: Kenwood Pages: 32
Kenwood 3560-X Hardware Installation Manual preview
3560-X
Brand: Kenwood Pages: 110
NEC SigmaBlade N8406-022 User Manual preview
SigmaBlade N8406-022
Brand: NEC Pages: 62
NEC InfiniBand NE3707-061 User Manual preview
InfiniBand NE3707-061
Brand: NEC Pages: 66
NEC QX-S5500 Series Installation Manual preview
QX-S5500 Series
Brand: NEC Pages: 80

Brands by name

Popular brands

Load more brands