DGS-3312SR Stackable Gigabit Layer 3 Switch
43
Port Configuration
To configure basic port settings such as port speed, duplex, and learning state, use the
Port Configuration
window.
Click the
Port Configuration
link in the
Configuration
folder:
Figure 4- 4. Port Configuration and The Port Information Table window
To configure Switch ports:
•
Choose the
Unit
from the pull-down menu.
•
Choose the port or sequential range of ports using the
From…To…
port pull-down menus.
•
Use the remaining pull-down menus to configure the parameters described in the table below.
The configurable parameters for ports include the following:
Parameter
Description
Unit
Select the Switch in the Switch stack to be configured using the pull-down menu. 15
a switch in standalone mode.
From… To
Select a port or range of ports to be configured
State
<
Enabled
>
Toggle the State field to either enable or disable a given port.
Speed/Duplex
<
Auto
>
Toggle the
Speed/Duplex
field to either select the speed and duplex/half-duplex
state of the port.
Auto
denotes auto-negotiation between 10 and 100 Mbps devices,
in full- or half-duplex. The
Auto
setting allows the port to automatically determine the
fastest settings the device the port is connected to can handle, and then to use
those settings. The other options are
Auto
,
10M/Half
,
10M/Full,
100M/Half
and
100M/Full
,
1000M/Full_M
and
1000M/Full_S
. There is no automatic adjustment of
port settings with any option other than Auto.
