CTC Union EcoZenith i350 L 1x230V, Installation And Maintenance Manual

Page: 66 / 132

66 CTC EcoZenith i360
12. Control system
Start menu
Back Select and save
Increase value
Decrease
value Decrease
value Increase
value
Scroll & Swipe sideways
Single click = Select
Double click = Open
12.1 Navigate on the touchscreen
Next
12.2 Start menu
This menu is the system’s home screen. This provides
an overview of the current operation data.
The system returns to this menu if no buttons are
pressed within 10 minutes. All other menus can be
accessed from this menu.
12.3 Alarm management
The serial number (12 digits) can be
found behind the magnetic strip. This
number is needs to be given to the
installation engineer and CTC support in
the event of a fault report.
Serial number
XXXX-XXXX-XXXX
article group–year/week–sequential number
Refer to the troubleshooting table at
the end of the installation manual.
Call your installation engineer in the
first instance
Signal Status
Green LED OK.
Red/yellow flashing LED Alarm.
Green flashing LED Operation with active electric heater - Applies only with language selection
"Danish".
Info message at bottom Information message about the current status