CTC Union EcoZenith i350 L 1x230V, Installation And Maintenance Manual

Page: 125 / 132

125 CTC EcoZenith i360
14. Factory settings
Designation Factory
setting
Min value Max value Alternative Set during
Installation
Heating circuit
Max primary flow °C 60 30 70
Min primary flow °C Off 15 65 Off
Heating, mode Auto Auto On Off
Heating mode, ext - Auto On Off
Heat off, outside °C 18 2 30
Heating off, time 120 30 240
Inclination °C 50 25 85
Adjustment °C 0 -20 20
Night reduction off °C 5 -40 40
Room temp reduced °C -2 -40 0
Primary flow reduced °C -3 -40 0
Alarm, low room temp °C 5 -40 40
Smart low price. °C 1 0 5 Off
Smart over capacity °C 2 0 5 Off
Max time heating 20 10 120
Charge pump % 60 25 100
Drying period mode Off 1 3 Off
Drying period temp °C 25 25 55
Heat pump
Compressor Blocked Permitted
Brine pump on (CTC EcoPart) Auto 10d On
Stop at outdoor temp °C (EcoAir) -22 -22 10
Tariff HP - Off On
Smart blocking HP - Off On
Start at degree minute -60 -900 -30
HS<->DHW time (sec) 120 30 240
Max rps 100 50 120 (80)
Max rps warm temp 50 50 100
Ext. silent mode rps 50 20 100
Cold temp limit 0 -15 0
Warm temp limit 20 0 20
Electric heater
Max el. heater kW 9.1* 0 11.9/9/10*
Max el. heater DHW kW 9.1* 0 11.9/9/10*
Start at degree minute -500 -900 -30
Diff step, degree minute -50 -300 -20
Main fuse A 20 10 90
Conv. factor curr. sensors 1 1 10
Tariff el. - No Yes
Smart block immersion - No Yes
*Applies to 3x400V, for other variants see Electrical data - Technical data.
For language choices "German" and "French" the max electric power is factory set at 0.0 kW.