CTC Union EcoZenith i350 L 1x230V, Installation And Maintenance Manual

Page: 82 / 132

82 CTC EcoZenith i360
Menu: "Installer/Display/Display Setup".
12.9.2 Language
Click a flag to select the language. The language
selected is highlighted with a green square.
To view more language options than those shown in the
menu, scroll down the page, or press the down arrow
key.
12.9.3 Display setup
Menu: "Installer/Display/Language".
Sleep delay 120 (Off, 1...360)
Enter the time in minutes before the display enters sleep
mode if not touched. Settings can be applied in 10 min.
intervals.
Backlight 80% (10...90)
Set the brightness of the backlit display.
Click sound Yes (Yes/No)
Enable or disable button sounds.
Alarm sound Yes (Yes/No)
Enable or disable alarm sounds.
Time zone, GMT +/- +1 (-12...14)
Set your time zone (relative to GMT).
Lock code 0000
Press "OK" and use the arrows to set a 4-digit lock
code. If a lock code is set, it is shown as four stars. You
will be prompted to enter the code when the screen is
restarted.
NB: Make a note of the lock code for your own
reference when you enter it in the menu for the first time.
The serial number of the display (12 digits) can also
be entered to unlock the screen; refer to the chapter
"Installer/System Information" chapter.
The screen can be locked by clicking the product name
in the upper left of the start menu, whereupon you will
be prompted to enter the lock code.
A lock code can be deleted by entering "0000" in this
menu instead of the previously specified lock code.
Font size Standard (Small/Standard/Large)
The display’s font size can be changed here.