CST/BERGER 2 610 A15 290, Original Instructions Manual

Page: 36 / 500

36 | English
2 609 141 178 • 2.4.14
Laser Receiver
Safety Notes
Read and observe all instructions. SAVE
THESE INSTRUCTIONS FOR FUTURE REFER-
ENCE.

Have the measuring tool repaired only through qualified
specialists using original spare parts.
This ensures that
the safety of the measuring tool is maintained.

Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids, gas-
es or dusts.
Sparks can be created in the measuring tool
which may ignite the dust or fumes.

Read and strictly observe the safety warnings in the op-
erating instructions of the rotational laser.
Product Description and Specifications
Intended Use
The measuring tool is intended for swift finding of rotating laser
beams in the wavelength listed in the “Technical Data”.
Product Features
The numbering of the product features shown refers to the illus-
tration of the measuring tool on the graphic page.
(see page 7)
Laser Receiver
33 Button for selecting the measuring accuracy
34 Audio signal button
35 Reception area for the laser beam
36 Display
37 Sensor for Strobe Shield
TM
function
38 Direction LED “move downward”
39 Centre-indication LED
40 Centre mark
41 Direction LED “move upward”
42 On/Off button
43 Speaker
44 Latch of battery lid
45 Serial number
46 Battery lid
47 Retainer openings for holder
48 Holder
49 Locking screw for holder
50 “Cut & fill” rod*
51 Fastening screw of holder
52 Spirit level holder
* The accessories illustrated or described are not included as stand-
ard delivery.
Indicator elements of laser receiver
a “Fine” adjustment indicator
b “Medium” adjustment indicator
c “Coarse” adjustment indicator
d Direction indicator “move downward”
e Centre indicator
f Direction indicator “move upward”
g Battery low indicator
h Audio signal indicator
Technical Data
Laser Receiver RD5
Article number F 034 K69 0N.
Receivable wavelength 620–830 nm
Receivable rotation speed >150 min
-1
Receiving angle 45°
Working range
1) 2)
0–400 m
Measuring accuracy
1) 3) 4)
– Setting “fine ”
– Setting “medium ”
– Setting “coarse ” ±0,5 mm
±1,0 mm
±2,0 mm
Operating temperature – 10 °C...+50 °C
Storage temperature – 20 °C...+70 °C
Batteries 2 x 1,5 V LR06 (AA)
Operating time, approx. 30 h
Weight according to EPTA-Procedure
01/2003
0.25 kg
Dimensions (length x width x height) 154 x 78 x 30 mm
Degree of protection IP 57 (protection
against dust and
temporary immersion
of water)
1) dependent on laser class and laser type of the rotational laser level
2) The working range (radius) can be reduced due to unfavourable ambi-
ent conditions (e.g. direct sunlight).
3) depends on clearance between laser receiver and rotational laser level
4) The measuring accuracy can be impacted by unfavourable environmen-
tal conditions (e.g. direct sun irradiation).
The measuring tool can be clearly identified with the serial number 45 on
the type plate.
OBJ_BUCH-1596-003.book Page 36 Wednesday, April 2, 2014 10:56 AM
www. .com
information@itm.com 1.800.561.8187