Crystal Vision
The active control panel
TANDEM-200 User Manual R1.7
78
13/02/2008
8.5 Audio
monitoring
menus
Pressing F3 from the home menu will bring up the top Audio Monitoring menu. The
configuration menus provide the following functions:
•
Select audio monitoring source
•
Enable/Disable rear monitoring bus
Audio monitoring menu structure
Description
Audio Monitor
F1 toggles rear audio monitor bus output through Analogue, AES
and Off
(Headphone connector always ON)
F3 selects source menu
Audio monitoring source
Shaft encoder selects
source reference
The analogue monitoring output may be used to extract a ‘breakout’ analogue signal from
a de-embedder when an output option-card is not fitted. In this case use the phantom
destination labelled
‘out 1’
or
‘out 2’
when routing to allow de-embedder (Demux)
outputs to be ‘shuffled’ prior to being selected by the analogue monitor output.
Note:
Audio monitoring is further discussed in section 10.3.
