Crystal Vision
Statesman operation in mode 4
TANDEM-200 User Manual R1.7
56
13/02/2008
7 Statesman operation in mode 4
The initial view will show an explorer style view of the connected frames and modules.
Double-click on a module to display the main application control panes.
The Statesman main application window
The two large control panes shown in the upper and lower halves of the window may
display different menus for the same card, or controls for different cards. Click on the
horizontal button-bar between the two panes to close the lower plane or drag the button to
vary the size of the panes.
The two panes allow dual-control display of both TANDEM-200 circuit paths or ‘sides’,
or two functions such as both embed and output routing can be shown for the same
‘side’.
The default menu shown when clicking on a module for the first time depends on the
current mode. Mode 4 defaults to showing the Status menu for SDI 1.
In mode 1 the status menu is used to select the audio groups chosen for de-embedding and
embedding in addition to displaying SDI and audio signal status, the current mode and
installed option cards.
The following card-edge shorthand codes are used for sources and destinations:
Code
Function – Mode 4
A
de-embedder SDI 1
B
de-embedder SDI 2
C
embedder SDI 1
D
embedder SDI 2
G
input option SDI 1&2
H
n/a
I
n/a
J
output option SDI 1&2
