Crystal Vision
Using card edge controls
TANDEM-200 User Manual R1.7
104
13/02/2008
9.13
Selecting the PLL mode
The PLL menu is obtained with MENU DIL, lever 3 ON (DOWN) and all other levers
UP (OFF
)
.
SEL
Display
Comments
2
PLL Off, 1 or 2
Select SDI PLL mode
Select the PLL mode from Off, Sdi 1 or Sdi 2 with the shaft encoder.
Note:
An explanation of the PLL function may be found in the Introduction and the
appropriate mode section of the Statesman chapter.
9.14
Selecting the re-sampling mode
The re-sampling menu is obtained with MENU DIL, lever 3 ON (DOWN) and all other
levers UP (OFF
)
.
SEL
Display
Comments
3
Resamp On, Off or n/a
Re-sampling (mode 3 only)
Select the re-sampling mode On or Off with the shaft encoder for Mode 3 only.
