Crystal Vision
Statesman operation in mode 2
TANDEM-200 User Manual R1.7
40
13/02/2008
Using the Embed Output router
Once de-embedding and embedding groups have been chosen, routing can be selected
with the Embedding Router and/or output routers.
Embedding Router for mode 2
Sources for the ‘C’ and ‘D’ embedders can be routed from the ‘A’ and ‘B’ de-embedders
and/or ‘G’ or ‘H’ external input option cards, if fitted.
Route source to destinations by clicking on the crosspoint squares in the matrix. Any
selections made will turn dark red. Invalid selections will be rejected and returned to the
last valid selection. Click on the Salvo button when finished. Valid selections will turn
bright red and new source-destination assignments will be loaded into the embed routing
table.
If only external audio destinations are needed and embedded outputs are not required use
the Output router menu.
The warning text ‘delay not available (embedder off), will be shown to indicate that delay
will not be available to an embed router (even if delay boxes can be checked) if the
associated embedder (C or D) has been turned off. This occurs because there is only one
delay function available on each TANDEM-200 ‘side’.
To assign delay to an embedder ensure that a group (1 - 4) has been selected in the Audio
Groups Out section for the appropriate embedder. Selecting ‘none’ for no embedded
audio group turns off the associated embed function and releases the delay function to an
output router.
