Crystal Vision
The active control panel
TANDEM-200 User Manual R1.7
77
13/02/2008
8.4 Configuration
menus
Pressing F3 from the home menu will bring up the top Configuration menu. The
configuration menus provide the following functions:
•
Current mode status and mode select (TANDEM-100 is mode 1 only)
•
Configure GPI and store and recall presets
•
SDI PLL On/Off and Resample On/Off
Configure menu structure
Description
Configure
Mode status (always 1)
F1: Mode (do not use), F2: GPIs and Presets, F3: PLL (SDI
TBC), F4: Resample On/Off
Select new mode with shaft encoder
Press CAL to change mode
New mode will be effective after TANDEM re-
configuration
Configure GPI
GPI 1234 = PRESET (0 to 15)
F1: Store, F3: Recall, F4: Disable
Store preset
Preset no. GPI status
F4 saves setup selected by shaft encoder
Recall preset
preset no. GPI status
F14 saves setup selected by shaft encoder
Recall preset confirmation
Recall preset no.
F3 recalls selected preset
SDI PLL
F1: in Side1, F2: in Side2 or F3: Off
Resample – for RS4 option cards only
F1: Off, F2: On
Notes:
Preset recall is not available from the control panel unless GPIs have been disabled.
It is strongly recommended to DISABLE GPIs when working on presets to avoid the
possibility of GPI inputs causing preset memory data to re-configure TANDEM-200 at
the same time as presets are being updated.
