Crystal Vision
The active control panel
TANDEM-200 User Manual R1.7
73
13/02/2008
8.3
Routing and delay menus
Pressing F2 from the home menu will bring up the top Control menu. The control menus
provide the following functions:
•
Current mode status and installed sub-module status
•
Audio group select for each side’s embedder and/or de-embedder
•
Each side’s audio delay
•
Source and destination routing
Select Group and Delay Value
Description
CONTROL
Top line: Mode and options fitted on each side
Bottom line: F1: side 1 group select, F2: side 2 group
select, F3: delay and F4: routing assign sub-menus
Side 1 group select
F2 and shaft encoder selects input group
F4 and shaft encoder selects output group
Press Enter to save setting
Side 2 group select
F2 and shaft encoder selects input group
F4 and shaft encoder selects output group
(Enter saves Group selection)
Audio delay value (1-681ms) for each side
F1 and shaft encoder control delay for Side 1
F3 and shaft encoder control delay for Side 1
Audio routing
Bottom line: further menus depend on options fitted
See ‘Assign Audio Routing’ table for more details
Note:
The presence of an audio group in the serial data stream is indicated by ‘=’ before the
audio group number in menu 1.2.1.
