Crystal Vision
Statesman operation in mode 3
TANDEM-200 User Manual R1.7
49
13/02/2008
Selecting audio groups for de-embedding
The status of all four incoming audio groups in the SDI stream is displayed next to four
select buttons on the left.
SDI1 Status for mode 3
Select the group required or select ‘None’ to turn de-embedding off for both A and B de-
embedders.
Selecting the de-embedding mode
The de-embedding format is also selected from within the SDI 1 Status menu. Select from
the following modes:
•
Sony audio fifo min – fastest processing delay
•
Sony audio fifo mid – medium processing delay
•
Sony audio fifo max – slow processing delay
•
SMPTE/SONY – slowest processing delay - use when input may not be in
Sony format
Selecting audio groups for embedding
Click on the SDI 2 menu to display embedding controls. Carrier presence status of all four
audio groups in the output SDI stream is displayed next to four select buttons on the right
of the display for each embedder.
SDI 2 Status for mode 3
Select the group required or select ‘None’ to turn embedding off.