Crystal Vision
Installation
TANDEM-200 User Manual R1.7
126
13/02/2008
HD-AOP2
The analogue audio output module provides two stereo pairs or four mono outputs that may be
used as destinations when routing de-embedded signals. Link jumpers are provided to allow
0dBFS to be set to +18dBu or +24 dBu. The variable adjustments on the card are set at the
factory and should not require re-adjustment. Set channel 1 with PL1/P1, channel 2 with
PL2/P2, channel 3 with PL3/P3 and channel 4 with PL4/P4.
HD-AOP2
Selectable jumper links are provided to change input and reference terminations and pre-set
levels, depending on sub-module features.
HD-AIP2
The analogue audio input module provides two stereo pairs or four mono signals that may be
used as a source in subsequent embedding. Link jumpers are provided to allow 0dBFS to be
set to +18dBu (rearwards, towards J1) or +24dBu (forwards, towards J2/3). The variable
adjustments on the card are set at the factory and should not require re-adjustment. Set channel
1 with PL2/RV2, channel 2 with PL1/RV1, channel 3 with PL4/RV4 and channel 4 with
PL3/RV3.
Take care to note the adjustment and channel numbering on this sub-board.
HD-AIP2
