Crystal Vision
Specification
TANDEM-200 User Manual R1.7
139
13/02/2008
Delay/Phase inversion
Dual channel digital audio delay - OFF or pre-settable in 1ms steps from 1
– 681ms. In addition each channel may be phase inverted
Silence detect delay
Silence detect delay for both sides is adjustable for the time a signal is
allowed to remain below –50dB wrt Full Scale before a silence error is
flagged. Values start at 1.5s, 8s and then in increments of 8s to 120s
Setups
Sixteen set-ups are available to store setup data. They may be recalled
either from the board control or through the use of external GPIs
GPIs
Four GPIs are available for external recall of setups and two are available
to provide alarm monitoring
Status monitoring
Front card edge visual monitoring with alphanumeric and LED indicators.
Remote control panel also available
Maskable GPI output of inputs/references present and silence
Weight
250g with two sub-modules fitted
AIP2: Dual analogue audio input sub-module
Audio input
2 analogue stereo pairs or 4 mono channels, 20 bit quantising A to Ds,
High input impedance (20K Ohm) balanced
Level range
0dBFS = +28dBu max / 0dBFS = +12dBu max
Default level: 0dBFS = +18dBu or +24dBu by on-board link
Signal to noise
-89dBu / -107 dBFS (+18dBu) rms., 22Hz to 22kHz typ.
Total harmonic
distortion
0.003% THD+N rms., 22Hz to 22kHz typ.
Interchannel crosstalk
-118 dB @ 1kHz, -98 dB @ 20 kHz, rms., typ.
Synchronisation
Digitised output of analogue A to D is automatically locked to video
AOP2: Dual analogue audio output sub-module
Audio output
2 analogue stereo pairs or 4 mono channels, 20 bit quantising A to Ds,
Low output impedance (66 Ohm) balanced
Level range
0dBFS = +28dBu max / 0dBFS = +12dBu max
Default level: 0dBFS = +18dBu or +24dBu by on-board link
Signal to noise
- 92dBu / -103 dBFS (+18 dBu) rms., 22Hz to 22kHz typ.
Total harmonic
distortion
0.002% THD+N rms., 22Hz to 22kHz typ.
Interchannel crosstalk
-112 dB @ 1kHz, -98 dB @ 20 kHz, rms., typ.
DIP2: Dual digital audio input sub-module
Audio input
2 x 20 bit stereo pairs. AES3 110 Ohm or HiZ (balanced) D Type, or
AES3-id (unbalanced) 75 Ohm BNC. Set by on-board links
Synchronisation
Synchronous audio to video 48kHz
