Crystal Vision
The active control panel
TANDEM-200 User Manual R1.7
70
13/02/2008
8.1
The TANDEM-200 menu structure
The main top-level menus for a module are obtained by pressing the F1, F3 and F4 keys
from that module’s HOME menu. Menu keys are illuminated when active and when
further menus are available. The four top-level TANDEM-100 menus are:
•
STATS (Status) – press F1
•
CNTRL (Control and Routing) – press F2
•
CNFG (Configure) – press F3
•
MON (Monitoring) – press F4
The following chart shows the majority of the available TANDEM-200 menus. The actual
menus available may vary slightly as TANDEM-200 software is updated.
The TANDEM-200 menu tree
Note:
Function keys and shaft encoder LEDs are illuminated when active.
Menus or function keys associated with the shaft encoder for changing assigned values
are shown with a black circle.
