Crystal Vision
Installation
TANDEM-200 User Manual R1.7
127
13/02/2008
HD-DOP2-110
This digital audio output module provides two 110 Ohm AES stereo pairs or four mono
outputs that may be used as destinations when routing de-embedded signals.
HD-DOP2-110
In addition, jumper links are provided to configure an optional external reference when using
the RM04, RM05 RM06 and RM36 rear modules, in place of a 2
nd
buffered output. The
reference may be selected between AES reference or word clock with JL4. Use JL2 and JL3
together to select between AES2 (2
nd
buffered output – upper two pins) or REF I/P (external
reference – lower 2 pins). Link jumper JL1 is provided to select the external reference input,
which is always fed via a ‘D’ connector, between 110 Ohm (upper 2 pins), HiZ (balanced –
centre pin only) or 75 Ohm (unbalanced – lower 2 pins).
HD-DOP2-75
This digital audio output module provides two 75 Ohm AES stereo pairs or four mono outputs
that may be used as destinations when routing de-embedded signals.
HD-DOP2-75
In addition, jumper links are provided to configure an optional external reference when using
the RM04, RM05 RM06 and RM36 rear modules, in place of a 2
nd
buffered output. The
reference may be selected between AES reference or word clock with JL4. Use JL1 and JL2
together to select between AES2 (2
nd
buffered output – upper 2 pins) or REF I/P (external
reference – lower 2 pins). Link jumper JL3 is provided to select the external reference input,
which is always fed via a ‘D’ connector, between 110 Ohm (upper 2 pins), HiZ (balanced –
centre pin only) or 75 Ohm (unbalanced – lower 2 pins).
