Merchant™ Operators’ Guide
Final Checkout
1810025
39
August 2009
Final Checkout
Now, you have connected your merchandiser to the utilities, placed it in its final location, loaded it
with products, and set the prices. Before you lock the door and move on, you should check to see if
your merchandiser will vend products. In case of problems, perform the operational readiness
checks beginning on this page.
1.
Perform test vends on all selections.(
See “Test Vend a Selection” on page 82.
)
2.
Do any of the snack or candy products catch on the tray and fail to vend? If not, skip to step 3.
If so, perform the following procedures on the affected areas until all products vend properly:
a. Install and/or adjust a product spacer. (
See “Installing and Removing Product Spacers” on
page 25.
)
b. Install a product pusher. (
See “PRODUCT PUSHER USAGE” on page 28.)
c. Install and/or remove spiral wall retainers.(
See “SPIRAL WALL RETAINER USAGE” on
page 27.)
d. Perform the appropriate spiral anti-hang-up procedure(s) (
See the “Spiral Indexing Proce-
dures” on the next page.)
3.
Test the operation of the coin mechanism (
See “Setting Up and Loading the Coin Mechanism”
on page 38
for the proper procedure.)
4.
Test the operation of the bill validator.
(See “Testing the Bill Validator” on page 41.)
5.
Return all test vended products to the trays.
Operational Readiness Check
Summary of Contents for Merchant Six 180
