Crane Merchant Six 180 Operator'S Manual Download

Page: 70 / 210

Programming: Data Recall

Merchant™ Operators’ Guide

August 2009

1810025

View Resettable Sales and Vend Data - Token (continued)

5. For example,

Vend Token-$

Displays the total values of token vends.

Vend Token-#

Displays the total number of token vends.

Value Token-$

*(see below)

Value Token-#

*(see below)

Overpay-$

*(see below)

Overpay-#

*(see below)

6. Press

and

to scroll through the entire list.

7. Press

once to return to the

Resettable Sales Data

menu or continue to press

return to the

Main Menu

NOTE

The above functions marked with a * are not currently available,

even though they may appear on the menu screen. These functions

will be supported in a future release of merchandiser software.

Summary of Contents for Merchant Six 180



















































































































































































































Search results

Summary of Contents for Merchant Six 180

Reviews:

Related manuals for Merchant Six 180

Brands by name

Popular brands

Crane Merchant Six 180, Operator'S Manual

Search results

Summary of Contents for Merchant Six 180

Reviews:

Related manuals for Merchant Six 180

Brands by name

Popular brands