Merchant™ Operators’ Guide
Programming: Test
1810025
89
August 2009
Test the Coin Return Motor
1. Press
until you reach the
Main Menu
,
then use
or
to select
Test
and
press .
2. In the
Test
menu, use
or
to select
Coin Return Motor,
then
press .
3. Press
to begin the test. The
Coin Return Motor
status screen will
cycle from “
Idle
” to “
Return Change
” for the
duration of the test.
NOTE
If the
Coin Return Motor
status screen
cycles to
Error
instead of
Return Change
,
exit this procedure by pressing
until you reach the
Main Menu
, then
follow the procedure to “Check for Errors” on
page 78 to further investigate the error.
4. When the test is completed, the
Coin Return Motor
status screen
will change back to
Idle
.
5. After the test, press
once to return
to the
Test
menu, or twice to return to the
Main Menu
.
+
_
+
_
Main Menu
Data Recall
5
Diagnostic
Test
Price
Product Configuration
6
Press EDIT to Select
Test
SureVend Detectors
5
Motor Test Summary
Motor Status Detail
Coin Return Motor
Display
6
Press EDIT to Select
Coin Return Motor
IDLE
Press START to Begin
Coin Return Motor
Return Change
Coin Return Motor
IDLE
Press START to Begin
Summary of Contents for Merchant Six 180
