Merchant™ Operators’ Guide
Initial Setup
1810025
19
August 2009
Removing and Installing Spirals (continued)
REMOVING A SPIRAL
1.
Pull forward on the retaining clip and
remove the end of the spiral from the
spiral coupler as shown.
2.
Remove the spiral from the tray.
INSTALLING A SPIRAL
1.
Pull the bottom of the retaining clip
toward the front of the spiral.
2.
Lower the spiral into the tray column
and insert the end of the spiral into
the spiral coupler as shown.
3.
Release the retaining clip.
SHOULD I USE A CLOCKWISE OR A COUNTERCLOCKWISE SPIRAL?
1.
The type of spiral used is determined by the column position it will occupy in the tray.
2.
Refer to the figure below to find the correct spiral type.
PULL
LIFT
SPIRAL
RETAINING
CLIP
SPIRAL
COUPLER
Summary of Contents for Merchant Six 180
