manualshive.com logo in svg

Crane Merchant Six 180, Operator'S Manual

The Crane Merchant Six 180 Operator's Manual is a comprehensive guide that enables users to operate and maintain their vending machines efficiently. Delve into detailed step-by-step instructions, troubleshooting tips, and essential safety information. Download this manual for free from our website, ensuring optimal performance and convenience.

Share
Download
background image

Merchant™ Operators’ Guide

Initial Setup

1810025

29

August 2009

PREPARING THE MERCHANDISER FOR VENDING "TOP SHELF"

National Vendors recommends that this product be vended from a candy tray.

Move the tray so the package can be loaded standing on its left or right edge. 
(See 

“Hold the coupler bearing in place and push the spiral coupler through the bearing until the cou-

pler clicks into position. Be sure the coupler is in the proper orientation as shown.” on page 23).

The following steps must be completed for three adjacent positions on the tray:

NOTE

The left-most position in the group of three 

must be an even numbered position.

NOTE

If the motor harness you disconnected in step 5 does not reach, use the

motor skip harness, P/N 1599024, available from the National Vendors Parts Department.

Couple the left motor to the right motor. (See “Couple Motors” on page 108.)

Loading Trays With Product (continued)

1. REMOVE COLUMN

DIVIDERS

2. REMOVE

SPIRALS

7. INSTALL AN 11-COUNT LEFT HAND

SPIRAL IN THIS POSITION

INSTALL AN 11-COUNT RIGHT-HAND

SPIRAL IN THIS POSITION

8.

157P0040

4.

DISCONNECT THIS

MOTOR CONNECTOR

3.

LEAVE THIS MOTOR

CONNECTOR ALONE

5.

MOVE CONNECTOR

FROM THIS MOTOR

6.

TO THIS MOTOR

Summary of Contents for Merchant Six 180



















































































































































































































Reviews:

No comments

Related manuals for Merchant Six 180

DFG E-TitanComb Instruction Manual preview
E-TitanComb
Brand: DFG Pages: 5
Baby Lock Coronet BLCT16A Instruction And Reference Manual preview
Coronet BLCT16A
Brand: Baby Lock Pages: 62
Pfaff hobbylock 4764 Operating Manual preview
hobbylock 4764
Brand: Pfaff Pages: 36
Janome 502X Servicing Manual preview
502X
Brand: Janome Pages: 30
Pfaff 1491E1 Instruction Manual preview
1491E1
Brand: Pfaff Pages: 130
Gamma PROGRESSION 600ES-LED Owner'S Manual preview
PROGRESSION 600ES-LED
Brand: Gamma Pages: 16
JUKI DDL-5550-7 Instruction Manual preview
DDL-5550-7
Brand: JUKI Pages: 12
Baby Lock Endurance BND9 Quick Reference Manual preview
Endurance BND9
Brand: Baby Lock Pages: 40
JUKI HZL-35Z Service Manual preview
HZL-35Z
Brand: JUKI Pages: 34
Canon FAX L380S User Manual preview
FAX L380S
Brand: Canon Pages: 224
Brother BES-1210AC Quick Reference Manual preview
BES-1210AC
Brand: Brother Pages: 2
Brother BES-1241 Quick Reference preview
BES-1241
Brand: Brother Pages: 2
Janome 1200D Manual preview
1200D
Brand: Janome Pages: 91
Janome FA4 Service Manual preview
FA4
Brand: Janome Pages: 29
Lucent Technologies FAX Attendant System Release 2.1.1 System Manager'S Manual preview
FAX Attendant System Release 2.1.1
Brand: Lucent Technologies Pages: 324
Indesit WMPG 742 Instructions For Use Manual preview
WMPG 742
Brand: Indesit Pages: 16
Indesit WMPG 762 Instructions For Use Manual preview
WMPG 762
Brand: Indesit Pages: 16
AT&T 2462 User Manual preview
2462
Brand: AT&T Pages: 50

Brands by name

Popular brands

Load more brands