Merchant™ Operators’ Guide
Final Checkout
1810025
41
August 2009
Testing the Bill Validator
1.
Insert a $1 bill into the validator.
2.
Push the coin return button.
•
If Change without Purchase (See “Set Change Without Purchase” on page 141.) is set less
than $1.00 and the bill is stacked - no money is returned - you must make a selection in
order to receive any change. Proceed to step 3.
•
If Change without Purchase (See “Set Change Without Purchase” on page 141.) is set less
than $1.00 and the bill is NOT stacked - the $1.00 bill will be returned.
•
If Change without Purchase (See “Set Change Without Purchase” on page 141.) is set to
$1.00 or more - you will receive four quarters in change.
3.
Make a selection. The correct selection should be vended and correct change should be
returned.
NOW WHAT?
There are many things you can do with your
merchandiser to make it more flexible. Refer to
the following Programming Section beginning
with “Programming: Introduction” on page 42
for this and other procedures.
Summary of Contents for Merchant Six 180
