Crane Merchant Six 180 Operator'S Manual Download

Page: 85 / 210

Merchant™ Operators’ Guide

Programming: Diagnostic

1810025

August 2009

DIAGNOSTIC ERROR MESSAGES

ERROR MESSAGE

ERROR DESCRIPTION

All Bills Disabled

The bill validator has been disabled.

All Coins Disabled

The coin mech is reporting that all the coin tubes are disabled and
are out of service.

All Selections Disabled

All of the machine selections have been disabled by the user.

Bill Validator Accept Jam

A bill is jammed in the acceptance path of the bill validator.

Bill Validator Comm

Communication has been lost between the main controller and the
bill validator. Check wiring harnesses and bill validator.

Bill Validator Motor

The bill validator is reporting a defective motor.

Bill Validator ROM

The bill validator is reporting a ROM checksum error.

Bill Validator Sensor

The bill validator is reporting a sensor problem.

Bill Validator Stacker is Full

The bill stacker in the bill validator is full.

Bill Validator Stacker is open

The bill validator stacker is open or removed.

Cabinet Temperature Sensor
Error

An error has been reported from the cabinet temperature sensor or
the sensor is not plugged in properly to the IO Board

Card Jammed in Card Reader

Card reader has failed because a card is jammed in the unit.

Card Reader Comm

Communication has been lost between the main controller and the
card reader. Check wiring harnesses and card reader.

Card Reader Error

The card reader is reporting a repeating error.

Card Reader Failed OOS Err

The card reader is reporting a failure and is out of service.

Card Reader Failure

The card reader has reported a failure and is out of service.

Card Reader Reports a Comm
Error & is OOS

Card reader is reporting a communication problem and is out of
service.

Card Reader Reports a Comm
Error

The card reader is reporting a repeating communication error but is
operational.

Card Reader Requests Servicing

Card reader indicates that it requires service, reader is still
operational.

Check Prices

An Invalid price has been set.

Check Winner Prize

The selection chosen for the winner prize is not valid.

Coin Mech Accept Jam

The coin mech is reporting that a coin is jammed in the acceptor
section.

Coin Mech Accept Unplugged

The coin mech is reporting that the coin acceptor is unplugged from
the main body of the coin mech and is out of service.

Summary of Contents for Merchant Six 180



















































































































































































































Search results

Summary of Contents for Merchant Six 180

Reviews:

Related manuals for Merchant Six 180

Brands by name

Popular brands

Crane Merchant Six 180, Operator'S Manual

Search results

Summary of Contents for Merchant Six 180

Reviews:

Related manuals for Merchant Six 180

Brands by name

Popular brands