manualshive.com logo in svg

Crane Merchant Six 180, Operator'S Manual

The Crane Merchant Six 180 Operator's Manual is a comprehensive guide that enables users to operate and maintain their vending machines efficiently. Delve into detailed step-by-step instructions, troubleshooting tips, and essential safety information. Download this manual for free from our website, ensuring optimal performance and convenience.

Share
Download
background image

Initial Setup

Merchant™ Operators’ Guide

August 2009

10

1810025

REASSEMBLING THE
MERCHANDISER

Replace the upper and lower panels and delivery 
bin.
If you are not sure that you can fit your 
merchandiser through the doorway, use the 
dimensioned drawing to make a cut out in 
cardboard. The drawing shown has the following 
removed:

•Delivery bin assembly 
•Upper knockout and the anti-theft bar
•Lower knockout
•Main Glass Door
•Trays removed if needed 

MOVING THE MERCHANDISER 
THROUGH THE OPENING

1.

Open the cabinet door and 
place it square with the left side 
of the cabinet.

2.

Carefully walk the merchandiser 
through the opening.

Moving the Merchandiser Through a Narrow Doorway (continued)

CAUTION

Be careful to not damage the tray harnesses

when removing trays from the merchandiser.

REMOVING THE TRAYS

1.

Unplug the tray harnesses from the PCB mounted inside the slide-out monetary.

2.

Pull the harnesses through the cabinet.

3.

Lift up the front of the tray, so that the stop built into the tray clears the roller, then pull
the tray forward and let it return to horizontal position.

Pull the tray forward in the horizontal position until the back stop on the tray hits the roller,

then lift the tray straight up to clear the roller and remove the tray from the merchandiser.

Summary of Contents for Merchant Six 180



















































































































































































































Reviews:

No comments

Related manuals for Merchant Six 180

Janome 107 Instruction Book preview
107
Brand: Janome Pages: 41
Panasonic KX-TG5480 Quick Setup Manual preview
KX-TG5480
Brand: Panasonic Pages: 8
Panasonic KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering... Operating Instructions Manual preview
KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering...
Brand: Panasonic Pages: 68
Singer 149-4 Parts List preview
149-4
Brand: Singer Pages: 3
Ricoh 4420NF Operating Instructions Manual preview
4420NF
Brand: Ricoh Pages: 116
UnionSpecial Picoetta G79000 Series Instructions For Installing, Operating And Adjusting With List Of Parts preview
Picoetta G79000 Series
Brand: UnionSpecial Pages: 44
Reliable 3300SD Instruction Manual preview
3300SD
Brand: Reliable Pages: 44
Husqvarna 0210 Technical Brief preview
0210
Brand: Husqvarna Pages: 184
JUKI DNU-1541-7 Instruction Manual preview
DNU-1541-7
Brand: JUKI Pages: 50
JUKI HZL-E61 Instruction Manual preview
HZL-E61
Brand: JUKI Pages: 72
JUKI AMS-210E-1306 Instruction Manual preview
AMS-210E-1306
Brand: JUKI Pages: 128
JUKI AMS-210E/CP-20 Instruction Manual preview
AMS-210E/CP-20
Brand: JUKI Pages: 137
JUKI APW-895 Engineer'S Manual preview
APW-895
Brand: JUKI Pages: 213
Bosch WAE24367UK Instruction Manual preview
WAE24367UK
Brand: Bosch Pages: 36
Panasonic KX-F1000BX Service Manual preview
KX-F1000BX
Brand: Panasonic Pages: 13
Panasonic KX-F1010BX Service Manual preview
KX-F1010BX
Brand: Panasonic Pages: 41
Panasonic KX FP205 - B/W Thermal Transfer (Spanish) Manual Del Instrucción preview
KX FP205 - B/W Thermal Transfer
Brand: Panasonic Pages: 52
Panasonic KX-F1000NZ Operating Instructions Manual preview
KX-F1000NZ
Brand: Panasonic Pages: 64

Brands by name

Popular brands

Load more brands