Crane Merchant Six 180 Operator'S Manual Download

Page: 66 / 210

Programming: Data Recall

Merchant™ Operators’ Guide

August 2009

1810025

View Resettable Sales and Vend Data - Cash (continued)

5. For example,

Cash In-$

Displays the total cash value in (including manual feed).

To Cashbox-$

Displays the total coin value to the cash box.

To Tubes-$

Displays the total coin value to coin tubes (including manual feed).

Bills In-$

Displays the total bill value in both the recycler and manual dispense.

Dispensed-$

Displays the total cash value dispensed in both the recycler and manual

dispense).

Man. Dispense-$

Displays the total cash value dispensed manually and by the recycler.

Sales-$

Displays the total merchandiser sales in dollars.

Sales-#

Displays the total number of merchandiser vends (Sales totals includes
Discount and Surcharge totals.)

Discount-$

Displays the total dollar value of all discounts in dollars (ex. 5 discount vends

of 10% on $1.00 selection will total $.50.)

Discount-#

Displays the total number of discounted vends.

*Surcharge-$

Displays the total dollar value of all surcharges.

*Surcharge-#

Displays the total number of surcharge vends.

Overpay-$

Displays the total cash value of overpays.

Overpay-#

Displays the total number of overpays.

Filled-$

Displays the total cash value of overfills.

Filled-#

Displays the total number of overfills.

* - Surcharge refers to the amount of money charged above the cost to accommodate a coin mech

and bill validator function when separate prices are set for card reader.

** - Overpay allows the customer to make purchases even if there is no change. The merchandiser

screen will display “USE EXACT AMOUNT”.

6. Press

and

to scroll through the entire list.

7. Press

once to return to the

Resettable Sales Data

menu or continue to press

return to the

Main Menu

Summary of Contents for Merchant Six 180



















































































































































































































Search results

Summary of Contents for Merchant Six 180

Reviews:

Related manuals for Merchant Six 180

Brands by name

Popular brands

Crane Merchant Six 180, Operator'S Manual

Search results

Summary of Contents for Merchant Six 180

Reviews:

Related manuals for Merchant Six 180

Brands by name

Popular brands