Merchant™ Operators’ Guide
Programming: Test
1810025
91
August 2009
Check the Temperature
1. Press
until you reach the
Main Menu
,
then use
or
to select
Test
and
press .
2. In the
Test
menu, use
or
to select
Temperature Sensors,
then
press .
3. In the
Temperature Sensors
screen you
can view and test:
•
Cabinet
- This is the temperature inside
the cabinet.
•
Evap
- This is the temperature of the
evaporator.
•
Cond
- This is the temperature of the
condenser.
These temperatures are only good for testing the
sensors.
4. Press
once to return to the
Test
menu, or twice to return to the
Main
Menu
.
+
_
+
_
Main Menu
Data Recall
5
Diagnostic
Test
Price
Product Configuration
6
Press EDIT to Select
Test
Motor Test Summary
5
Motor Status Detail
Coin Return Motor
Lighting Relay
Temperature Sensors
6
Press EDIT to Select
Temperature Sensors
Fahrenheit
Cabinet: XXX Evap: YYY
Cond: ZZZ
Ready
Cab: 49ºF
NOTE
The actual running temperatures of the Cabinet,
Evaporator, Condenser and the current state of the
Compressor can be rotated through by pressing the
“OK” key while the door is closed. These tempera-
tures will be displayed in the lower right hand corner
of the display.
Summary of Contents for Merchant Six 180
