CoolSky Super 80 Professional Operating Manual Download Page 99

Page: 99 / 330

Super 80 Professional – AOM

ANTI-ICE AND RAIN PROTECTION

Section 7 Page 5

Super 80 Professional – Aircraft Operating Manual

Coolsky, 2018

WARNING AND CAUTION INDICATORS

4 & 15. ENG ANTI-ICE ON LIGHTS

(L, R)(Blue)

Indicates engine anti-ice system is on.

8. WING ANTI-ICE ON LIGHT (Blue)

Indicates anti-ice heat has been selected

for wing leading edge and strakes.

9. TAIL DE-ICE ON LIGHT (Blue)

Indicates de-ice heat has been selected for

the leading edge of the horizontal stabilizer.

PITOT/STALL HEATER OFF LIGHT (Digital

display)

Comes on to indicate METER SEL & HEATER

selector in OFF. MASTER CAUTION light also

comes on.

3. RAIN REPELLENT RESERVE IN USE LIGHT

(Blue)

Indicates reserve fluid container has been

selected.

Summary of Contents for Super 80 Professional











































































































































































































































































































































Search results

Summary of Contents for Super 80 Professional

Reviews:

CoolSky Super 80 Professional, Operating Manual, Page: 99 / 330

Search results

Summary of Contents for Super 80 Professional

Reviews: